1691978 Simplicity Tiller - Overview

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

It is a genuine replacement part that is sourced directly from original equipment manufacturer for use with Snapper and Simplicity lawn mowers. This special hardware is generally used to secure the mower blade to the spindle, please make sure to check appropriate diagrams of your model for correct application of this screw. It is a high-quality metal hex head screw that is sold individually.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This item is sourced directly from the original equipment manufacturer. It is specially designed for Snapper, Simplicity, and Murray riding lawn mowers and garden tractors. The idler pulley helps to apply tension on the belt. It is an identical replacement for a damaged or a missing component that was installed on a new unit. The pulley i...Read mores made of high-quality materials and is sold as an individual component. Check the diagrams for your model to ensure the proper repair procedure. You will need a wrench set to remove and secure the hardware.

This authentic item is supplied directly from the original equipment manufacturer for use with lawn mowers and lawn tractors made by Murray, Snapper, and Simplicity. The washer goes next to the bushing. A screwdriver, a set of pliers, and a wrench set may all be necessary during the installation of this part. It is made out of metal and will need to be replaced if it bends or breaks. This item is sold individually.

Set screw

Capscrew 5/16-18x.625

Washer flat

Lockwasher split 3/8