1691881 Simplicity Lawn Mower - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This metal washer is a genuine OEM part that is commonly used on various lawn equipment and is typically used to secure and seal connected components. This washer is high-quality and is sold individually, so consult with the relevant diagrams for your model to correctly determine where this washer would be for your equipment, and whether you need one, or more.

This is a genuine Simplicity replacement part used in compatible mowers and tractors. The relief bearing attaches to the wheel and is made of metal. If this part wears down it will need to be replaced and may require a set of pliers and a hammer during the installation. It is available as an individual replacement even though two may be needed.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This Simplicity Decal is made of white and blue plastic, measures approximately 11 inches x 2 inches, is not part of a kit or assembly, and is sold individually. No tools are required to complete this repair. Simply clean the area and apply the decal. Customers rate this repair as Easy.

This is an OEM part sourced directly from the manufacturer. The nylock nut is commonly found in snow throwers and lawn tractors from Murray and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the p...Read morearts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The nylock nut is available as an individual replacement part.

Lockwasher split 3/8

This is an authentic Murray replacement part, sourced from the original manufacturer for use with lawn and garden equipment. The special hex head bolt is used with a variety of types of equipment and its application can vary based on the model. This bolt is available as an individual replacement part.