1691530 Simplicity Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in snowthrowers and lawn tractors from Murray, Simplicity, and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in t...Read morehe machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this part. This item is available as an individual replacement part.

This is a genuine replacement part that is sourced from the original manufacturer to be used with outdoor power equipment. The metal bolt is used with a variety of different types of equipment and the application of the bolt can vary based on the model of the machine. This bolt is available as an individual replacement part, please note a socket wrench may be required to install this item.