1690448 Simplicity Lawn Tractor - Overview

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

Introducing the starter solenoid from Simplicity specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the engine starter as you turn the ignition switch into the start position. Made from high-quality materials and crafted with careful attention ...Read moreto detail it serves as a durable and reliable addition to your lawn tractor machinery. Before installing remember to disconnect the battery and make sure to wear work gloves for your safety. This solenoid is included in a kit for your convenience. Trust Simplicity for all your lawn tractor parts needs.

This is a genuine Simplicity replacement part used in compatible mowers and tractors. The relief bearing attaches to the wheel and is made of metal. If this part wears down it will need to be replaced and may require a set of pliers and a hammer during the installation. It is available as an individual replacement even though two may be needed.

Key-ignition indak

This external retaining ring is a type of fastener used to secure components in various models of tractors. It is a genuine OEM replacement part provided by the manufacturer, also known as an E-ring or circlip, which is responsible for exerting pressure against components prevent it from dislodging. The ring is a circular metal part with ...Read moreprotruding tabs or ears that can be gripped for easy removal or installation. If the retaining ring wears down or becomes damaged, it will cause the equipment parts to become unstable or fall off resulting in loss of functionality, and damage. Use retaining ring pliers to compress the ring and slide it out of its groove. Align the new ring with the groove and slide it in. Each external retaining ring is sold individually.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

Cap-fuel w/gauge

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.