16877 - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an authentic manufacturer sourced replacement v-belt which is specially designed for use with Murray, Snapper and Simplicity lawn mowers. It is the main deck belt that is used to drive the blades, over time belts tend to wear out and stretch eventually requiring replacement to maintain peak performance. Clean the pulleys off befor...Read moree installing the new belt to ensure top performance and longevity with your new belt. This part is made of high-quality rubber material and it is sold individually.

This is a genuine replacement part manufactured for use with riding lawnmowers. The special idler pulley is used to guide the deck belt around the other pulleys on the deck. This idler pulley is commonly the center idler pulley and is available as an individual replacement part.

Pulley 3 od

Keep in mind that this high-quality part is sold individually. The flat idler attaches to the spot idler arm and helps to drive the belt. It will need to be replaced if it becomes broken or stretched. A socket set and a wrench set may be needed when replacing this part. This part is an original part from Murray, Snapper, and Simplicity fo...Read morer use in rear engine rider mowers, rotary mowers, drive tractors, yard cruisers, and lawn tractors.

This is an OEM part sourced directly from the manufacturer. The nylock nut is commonly found in snow throwers and lawn tractors from Murray and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the p...Read morearts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The nylock nut is available as an individual replacement part.