16876 - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This 5/8 Washer is an OEM part that spreads load under a bolt or nut in a variety of different lawn equipment. This washer has an inside diameter of 0.625 inches, or 5/8. It is silver in color, made of metal, and sold individually. Over time, the washer may become damaged due to fatigue, and need to be replaced. Depending on the locatio...Read moren of the bolt or nut it is associated with, this repair may vary in difficulty, but generally it should be easy and not require any special tools.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an authentic part that is supplied by the original equipment manufacturer for use with Craftsman snowblowers. It is specially utilized to secure the chute components. If the hardware is missing or is damaged, this will provide an identical replacement. Refer to the parts diagram for your model to ensure the exact location and the ...Read morecorrect application. A wrench set will be needed to secure or remove this carriage bolt. Note, this high-quality part is made of durable metal and is sold as an individual item.

This is a genuine replacement part sourced from the original manufacturer for use with riding lawnmowers. The special nut is commonly used to secure the steering wheel to the steering shaft. This nut is available as an individual replacement part, please see model diagram for associative parts.

Lockwasher split 3/8

This is a genuine OEM part. The Murray headlight switch is composed of metal and plastic, and is designed for use with many lawn tractor engines. This item is secured onto the upper wiring harness of the engine. The headlight switch is designed to allow the operator improved visibility. A screwdriver may be necessary in the removal and replacement. This component is sold individually.

This authentic manufacturer-sourced component is specially designed for Murray, Snapper and Simplicity lawn mowers. It is an identical replacement for a missing or a damaged hex nut that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this hardware. Keep in mind...Read more this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.