1679-01 (SER 915A) Milwaukee Electric Drill - Overview

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

This is a genuine Milwaukee replacement part, it is sold individually. 2 of these Brushes are required in the tool listed below. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. N...Read moreew brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This plastic replacement handle fits various models of Milwaukee drills. It is an authentic replacement part assembled by original manufacturer. This is the main trigger handle which houses the cord, cord protector, and trigger switch. This part is sold individually.

This is an authentic Milwaukee replacement part that is intended to be used with drills and boring machines. The handle is OEM sourced to ensure a high-level of quality. This handle attaches to the motor housing using a hex head bolt. The handle is used to provide a sturdy grip while the tool is being operated. This part is priced as a single item, please note the hex head bolt are separate.

This is a Genuine OEM Approved replacement part used on Milwaukee Drills. This switch has a Plastic Body. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would...Read more need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing

This keyed chuck has a 1/2 inch capacity with a 5/8 inch - 16 thread. Use with chuck key 48-66-3280 and key holder 48-66-4040. The metal construction provides heavy-duty durability while the keyed design ensures the bit retention needed for high-torque applications. It can be used on reversing drills of matching capacities and threaded sp...Read moreindles. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem.

This cord is a genuine Milwaukee replacement part and is sold individually. This cord is used on the Milwaukee tool listed below It is a 3 wire cord with 3 prongs and does need to be grounded to the tool.

Includes Spindle, Chuck Key, Chuck Screw, and 1/2" Chuck.