1595 (826081) Graco Sprayer - Overview

This part is available as an individual replacement. The cap attaches to the frame and is made out of plastic. A hammer may be necessary during the installation of this item. Over time this part may break and will need to be replaced. This item is an OEM from Graco for use in sprayers.

The O-Ring is a blue, rubber ring which is used to provide an airtight seal between connected parts, such as between the diffusion tube and filter cap. If the part is broken due to general wear/fatigue, there will be a leak and it should be replaced. Refer to your make, model and diagrams to ensure this is the best part for you.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This OEM wheel is constructed of plastic and rubber, and comes in black/white. It attaches onto the axle shaft to provide easy movement. Installation is rated as "Easy" by customers and will require a socket (Tip: Make sure tire is inflated to proper PSI). If the wheel is flat or damaged, then it may be broken and require replacement. Refer to your make, model and diagram to ensure this is the correct part for you.

This Tool Box is manufacturer-certified, blue, and constructed of metal. It's rated as being "Easy" to use, and requires a screw driver and wrench set. It can be used to store and protect the components of the airless pain sprayer. It attaches to the frame of the unit. If broken or damaged, it should be replaced. Refer to your make, model and diagrams to check if this part is right for you.

This 3/8-inch male pipe plug is used to seal unused ports in fluid transfer systems and manifold housings on high-pressure spray equipment. Made from durable steel, it helps maintain system pressure and prevent leaks during operation. It’s a simple, direct replacement for damaged or missing plugs to restore proper sealing and reliable performance.

The Manifold Filter Support (Tube, Diffusion) is a black, plastic part which is used to secure the filter. It attaches with the filter mesh and the filter cap. If broken, damaged, or worn it should be replaced. Installation is rated as "Easy" by customers. Refer to your make, model and diagram to ensure this is the correct part for you.

This authentic blue OEM motor shield in your paint sprayer protects the motor from dust, dirt, water, and debris. It ensures optimal motor temperature by aiding in heat dissipation. The shield is located on the top or side of the sprayer. A broken shield may have cracks, breaks, or missing sections, and may wobble when touched. Not replac...Read moreing the shield can result in motor damage, overheating, and an increased risk of electrical shock. When removing your existing shield, remove its fasteners with a screwdriver or a pair of pliers. Detach the shield from your machine by wiggling it to release it. The motor shield and the motor itself are sold separately.

This OEM label refers to the SmartControl feature which is available on certain models of Graco sprayers. It is a flat, rectangular label measuring 6.25 inches by 3 inches.

This manifold filter cap repair kit is designed to properly seal the fluid manifold and secure the internal filter in an airless paint sprayer. It includes the essential components needed to prevent leaks, maintain proper filtration, and support consistent spray pressure. Built for durability in high-pressure applications, this kit is an ...Read moreeffective replacement solution for restoring reliable sprayer performance and preventing fluid or pressure loss during professional use.

This transducer is sourced from the original manufacturer for use in paint sprayers. The transducer, also known as a pressure transducer or pressure sensor, is responsible for monitoring and measuring the pressure of the paint being sprayed. The transducer then relays this information to the control system which allows the sprayer to rema...Read morein in the desired spray parameters and prevent over pressurization. Transducers can fail due to electrical issues, or mechanical damage, which can cause inaccurate pressure readings, loss of control, inconsistent spray patterns, poor paint application and fluctuating pressure rates. To remove a faulty transducer first, disconnect the electrical wires and fasteners holding it in place. Position the new transducer in the empty slot and reattach the electrical connections and any mounting hardware to complete your repair.