1529MD Murray Snow Blower - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

An authentic high quality retainer that is supplied directly from original equipment manufacturer for use with Murray, Snapper and Simplicity snowblowers. This part is secured on the bottom of the chute assembly, it helps to secure it to the auger housing. It is a durable plastic item that is sold individually, please note the hardware to secure it is sold separately.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This is an authentic manufacturer-sourced cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your unit it will be used in different locations to secure two parts together. Please make sure to check appropriate diagrams for correct application for this part. Th...Read moreis high-quality cotter pin is made of durable metal and is sold individually. It is best to use pliers to remove or install this part.

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in ...Read morepairs and include the nuts and washers, the bolt sets are sold as individual sets.

It is a genuine item that is supplied by the original equipment manufacturer for use with Murray, Snapper and Simplicity snowthrowers. This is an identical replacement for a missing or a faulty switch that was originally installed on a new unit. It is the part that allows a user to turn on and off the chute rotation. Please make sure to r...Read moreefer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality plastic body switch is sold individually.

The chute rotation motor attaches to the pinion. This is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with snowblowers made by Murray, Snapper, and Simplicity. A screwdriver may be necessary during the installation of this part. It is made of durable materials and will require replacing if it breaks.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.