150BT (2009-10) Husqvarna Leaf Blower / Vacuum - Overview

The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden equipment. This knob can become worn over time, which will cause the air filter cover not to stay in place. Most of our customers find this to be an easy repair. It does not require any special tools.

This swivel joint is a genuine Husqvarna replacement part that is specially designed for use with backpack blowers. It is the joint that connects on one end to the flexible hose and to the middle tube on the other end. If this part is cracked or damaged otherwise the blower will loose the airflow power requiring joint replacement. This swivel joint is made from durable black plastic and it is sold individually.

The clip attaches to the band. It is sold individually even though two may be needed. This part is an OEM from Husqvarna and Jonsered for use in backpack blowers. A screwdriver and a set of pliers might be required during the replacement of this part. This item is made out of plastic and will need to be replaced if it breaks.

This is an OEM sourced replacement part used on Husqvarna backpack blowers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package it comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and s...Read morequeeze it with a paper towel to remove the excess oil. This filter is made out of foam material and it is sold individually. No tools needed to replace this air filter. • Remove knob bolts that secure the cover • Remove cover and replace filter element • Reassemble and test the unit

This is an original part from Husqvarna. The bellows is constructed of durable plastic, and is compatible with many backpack blowers. This item is clamped between the elbow and the swivel joint, allowing the operator to direct the air flow for quick yard cleanup. A screwdriver and a pair of pliers may be required for the installation. The bellows is sold individually.

This is a genuine Husqvarna and Jonsered part sourced directly from the manufacturer. The metal piston ring is for use in blowers and attaches to the piston. Piston rings help in the sealing of the combustion chamber. It may become bent or broken and will require replacing. This is available as an individual replacement part, but two may be required for installation.

This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this component. Keep in mind this high-quality nut is made of durable metal and is sold individually.

It is an authentic OEM part that is designed for use with Husqvarna backpack blowers. The tube connects with other tubes to provide a user with an extended reach. If the part is damaged or is missing, this will provide an identical replacement for the original component that was included with a new unit. One durable plastic middle tube is...Read more included. Replacing it does not require any special tools. Refer to the owner\\\'s manual for the correct application.

The holder goes between the knob and the handle. This is a Husqvarna replacement part directly sourced from the manufacturer for use in backpack blowers. The part is sold individually and is made of plastic. During replacement, no tools should be necessary to help install the holder correctly. Over time this item may break and will need to be replaced.

The flat nozzle attaches to the tube. It is a genuine item that is supplied by the original equipment manufacturer for use with Husqvarna blowers. This part is available individually and is made of plastic. During replacement, no tools are required to help install this part correctly. It will require replacing if it becomes broken.

This is an authentic OEM sourced starter assembly which is specially designed for use with handheld backpack blowers. It is an identical replacement for a missing or faulty mechanism that allows a user to pull-start the engine. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Note...Read more that this assembly is sold individually, keep in mind it includes a plastic housing, a starter pulley, a starter spring, and a pull rope with a grip. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.