14D937 (0101-G1) Briggs and Stratton Engine - Overview

This is a round, inline fuel filter with 0.25-inch nipples, used in a variety of lawn and garden equipment. It is sourced from the original equipment manufacturer and has the capability to filter out particles as small as 150 microns in size. The filter is designed to remove any dirt or debris in the fuel to avoid contaminating the engine...Read more. Over time, it is common for the filter to become clogged with dirt/debris or damaged, resulting in less fuel entering the engine, engine misfiring, stalling, and overall lower performance from your equipment. To replace the faulty fuel filter, first disconnect the fuel lines with pliers or a clamp tool and then pull out the old filter. Install the new filter into the housing and reattach the fuel lines to complete your repair.

This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak performance, it could be because of a damaged crankcase. A damaged crankcase gasket can cause serious problems in your engine, so it is recommende...Read mored to replace it immediately if it is damaged. This product is gray in color and is sold individually. It is a genuine OEM part from the manufacturer.

This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to ...Read moreyour make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This item is a genuine OEM sourced replacement part that is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the air cleaner assembly and the carburetor. This item is priced as a single part.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

This is an authentic replacement part manufactured for use with small engines. Seals can deteriorate overtime, and it is recommended to replace worn seals when servicing an engine. This seal is the lower seal in the engine's sump, the seal is sold individually.

This item is a genuine Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines. The metal key fits into the slot on the crankshaft and aligns with the keyway in the flywheel. This key allows the flywheel to rotate in unison with the crankshaft. The flywheel key is sold individually.

It is an authentic manufacturer-sourced replacement component is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This part is utilized to provide an air-tight seal for the dipstick tube, over time it may wear out and begin to crack eventually requiring a replacement. It is a high-quality item that is made of durable rubber and is sold individually.

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace...Read more the breather valve a flat-head screwdriver, hammer, 7/16th-inch socket, 3/8th-inch socket or nut driver, Phillips-head screwdriver, 5/16th-inch socket or nut driver, 3/8th-inch socket or nut driver, pliers.

This high quality replacement air cleaner cartridge is specially designed for use with Briggs and Stratton engines. It is an authentic OEM sourced item, not an aftermarket equivalent. It is utilized to filter out dust and debris from contaminating the carburetor and the engine. This filter is made from pleated paper in a plastic case and ...Read moreit is sold individually. Please note, the foam filter is sold separately. Replacing this air cleaner cartridge is a simple task that does not require any tools. • Remove the air cleaner cover • Replace the cartridge • Secure the cover

This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. I...Read moret is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.