14BR94KK066 ((TB2654)(2014)) Troy-Bilt Lawn Tractor - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This manufacturer-certified Ignition Key comes in black/silver and is used in the ignition slot to turn on the engine. If your key becomes damaged or lost (which these small keys easily are), this part will be an exact replacement. It is made of metal and is sold individually.

The Lock Ball Joint Assembly is part of the steering mechanism, and the machine will not be able to steer without it. This part attaches to the steering block and drag link. Installation is rated as "Easy" and requires a wrench set and socket set.

This OEM-sourced interlock switch is a safety feature in your lawn equipment, designed to prevent accidents and injuries by stopping the machine from running if specific conditions are not met, such as when your foot is not pressing on the brake. It is typically located near the control panel, handle, or seat of the lawn mower. A faulty s...Read morewitch will cause the mower to fail starting, shut off when you are engaging the blades, or continue running without activating the safety features. Before replacing the switch, make sure the lawn mower is unplugged from its power source. Consult the user guide for instructions on accessing the switch. You may need a wrench or screwdriver to remove other components from the machine. Once you have located the switch, disconnect any wires and remove any fasteners holding it in place. Please note that this replacement part is sold individually.

This OEM Deck Adjustment Gear connects to the bracket at the rear of the deck and is necessary to move the deck up or down. If this part fails, installation of this replacement is rated as "Easy" and requires just a pair of pliers, a socket set and screwdriver.

The hex flange bearing connects to the steering shaft. This item is available as an individual replacement part. This part is an OEM from Troy-Bilt, MTD, Yard Man, and Cub Cadet for use in lawn tractors. It is made of metal and may require a wrench during installation. Over time this part may break or become stripped and will need to be replaced.

This Click Pin (aka a Lynch Pin) is a metal, gold, individually sold pin which can be installed with a screwdriver and socket set. It attaches to the gearbox assembly and will need to be replaced if missing or broken. Customers have determined that this is an easy repair.

This genuine manufacturer-sourced replacement flat washer is designed for use with lawn and garden equipment. It helps to distribute the pressure evenly allowing parts to be secured safely, this is a standard hardware which has multiple applications based on the model of your equipment. Please refer to appropriate diagrams for the correct...Read more location and use of this item. This washer is made of high-quality metal and it is sold individually.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with riding lawnmowers. The special wheel is commonly used to support the front end of the mower\\\'s deck and to guide the deck over the ground. This special wheel is available as an individual replacement part, please note two are required.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.