14527XLS (2010-08) Husqvarna Snow Blower - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The deflector spring is made of metal and attaches to the deflector assembly. This spring is available as an individual replacement part. It will need replacement if it becomes stretched or broken. It is used in Husqvarna, Poulan, and Jonsered snowblowers and is an OEM from the manufacturer.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This control cable is designed to give the user the ability to control the deflector, also known as the chute, for their snowblower and control where the snow that is discharged from it goes. Designed and compatible with various makes and models of snowblowers, this cable is made of high-quality metal that is insulated with high-quality r...Read moreubber. If you find the deflector difficult to move or erratic in its movement, or notice significant wear and tear on this cable, it needs to be replaced. This cable connects to the chute control lever that the user can move or raise and lower to change the deflector angle. Replacing it is as simple as disconnecting it carefully from the deflector and lever and connecting the new cable with the coiled end to the deflector and the straight end to the lever. To avoid having to replace this cable often, make sure to keep it and its machine clean and dry, and avoid placing excessive stress on it.

This is a genuine OEM part from Husqvarna. The brake spring is compatible with many snowblower machines. This metal spring is hooked from the frame assembly to the idler pulley, providing tension to the snowblower brake. The brake spring is sold individually. For the repair, you will need a screwdriver, adjustable wrench and a pair of pliers.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

The flange bearing goes between the pulley flange impeller and the impeller assembly. This part is an OEM from Husqvarna, Poulan, and Jonsered for snowblowers. It is made of metal and will need to be replaced if it breaks. This high-quality part is priced individually and may require a socket set during installation.

This manufacturer certified 1/4 Hex Nut can be installed using a wrench or socket and is used to secure parts in place and spead the load. If the part being secured seems loose, check this nut and replace it if broken or missing. Refer to your make, model and diagrams to ensure this is the right part for you.

The deflector control assembly attaches to the frame. This part is made of metal and plastic and is available individually. This is an authentic Husqvarna and Poulan replacement part that is sourced from the original manufacturer for use with snowblowers. You may need a socket set and a nutdriver when replacing this part. It may become broken or stretched and will need to be replaced.

This retainer spring, also known as a retainer clip, is an authentic manufacturer replacement part for a variety of lawn and outdoor power equipment. It is responsible for securing the equipment parts and preventing them from dislodging or becoming loose during operation. If the retainer spring is rusted, unable to maintain tension, or is...Read more improperly installed, it will cause the equipment parts to become unstable, and noisy, and lead to eventual equipment failure. Carefully remove the spring from its position by releasing the tension on it. Place the new spring in position, and if needed, reapply tension to the spring to ensure it is securely attached to the component parts.