My Orders
14440 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fluorescent lamp bulb
1 person
found this instruction helpful.
-
Danial from HILLSBORO, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.
Was this helpful?
Thank you for voting!
leaking front door. loose seal.
3 of 9 people
found this instruction helpful.
-
Frank from SANTA ROSA, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Followed instructions, those were OK.
Dishwasher front still leaking
Dishwasher front still leaking
Was this helpful?
Thank you for voting!
one leg of the terminal block was loose and overheated under load.the terminal block melted and could have caused a fire.
-
brendan from lebanon, NH
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set, Wrench set
I took a picture of the setup and damage . I then disconnected the burnt wires and replaced the wires . Then I installed the new terminal block and connected the wires to the proper positions. The reason for the failure was that the delivery people didn't tighten the cord when they installed the stove . I would check the connections per
... Read more
iodically as to avoid another situation like this .
Read less
Was this helpful?
Thank you for voting!