My Orders
1439- Briggs and Stratton Pressure Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had stripped thread had to rethread and install pump unloaded rebuild kit.
2 of 3 people
found this instruction helpful.
-
Leonard from SAGINAW, MI
- Very Difficult
- More than 2 hours
The reinstall was the hardest because the amount of tension with the spring. Had to cobble something together to hold spring tension until I got the new nut plug started. To bad you don’t give instructions and or tools to help with the actual install.
Was this helpful?
Thank you for voting!
check valve O ring was badly deteriorated - spraying water out at O ring
2 of 6 people
found this instruction helpful.
-
bernard from INDIAN TRAIL, NC
- Easy
- 15 - 30 mins
-
Socket set
The description of the parts package on your website did not appear to be in proper (size) scale However, after following a Youtube video, I was then able to decipher what parts went where to be sure I was ordering the correct parts that I needed. Parts were shipped promptly and I found that replacing just the check valve o rings and sea
... Read more
ts, it cured the problem without having to use the other parts that came with the kit package. Would definitely order from this site again. BL NC
Read less
Was this helpful?
Thank you for voting!