143666252 Craftsman Engine - Parts

This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.

This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise ...Read morefrom the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.

This primer line hose, which measures 18-3/4 inches long is a crucial component in your outdoor power equipment. It delivers fuel from the primer bulb to the carburetor, providing the initial fuel boost to start the engine. If you notice fuel leaks, cracks, or visible wear on the hose, it means that it is broken. Additionally, a spongy pr...Read moreimer bulb or the failure to deliver fuel to the carburetor when pressed are signs of a malfunctioning primer line hose. When this happens, your machine will be difficult or impossible to start. To remove the hose from your machine, disconnect it from both the carburetor and the primer bulb with pliers or a screwdriver. Please note that this replacement part is sold individually as an authentic OEM component.

It is a genuine gasket that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This special gasket is utilized to provide an air-tight seal for the muffler, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Over time th...Read moree material may wear out and begin to crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable composite material, please note it is sold individually.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman and Tecumseh pressure washers, lawn mowers, and snow blowers. When pulled, the starter rope engages starter spring causing the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. Th...Read moreis part is made of nylon rope and is sold individually. To install the rope you will need a screwdriver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.

This is a genuine OEM sourced part which is specially made for use with a variety of lawn and garden equipment. A spark plug delivers electric current from the ignition system to the internal combustion engine. Unfortunately, over time spark plugs will become dirty or fouled eventually requiring a replacement to maintain peak performance....Read more Note, you should gap your spark plug according to the owners manual of the outdoor product you have. Keep in mind this high-quality spark plug is made of durable materials and is sold individually.

This breather element is also called an air filter cartridge, cleaner element, or engine filter. It prevents debris from reaching the carburetor of your lawn equipment while allowing clean air to enter. This clean air-fuel mixture is essential for energy production. A broken or clogged breather element can lead to fuel flow issues, errati...Read morec operation, or starting difficulties. Neglecting to replace a damaged breather element can result in engine problems such as poor fuel combustion, reduced power, or engine stalling. To access the breather element, locate its housing on your machine using your instruction manual. Remove any necessary clips or screws with pliers or a screwdriver. You may also need to put oil on this breather element while installing it into your machine, according to instructions given by its manufacturer. This OEM-verified component is sold individually.

This is a genuine replacement part manufactured for use with snowthrower engines. This metal hex head screw is flanged to secure a good fit. The screw is used to secure the carburetor cover on many snowthrower engines, however this is a versatile screw, and may have other applications. The screw is sold individually, please see model diagram for part location, and function.