14360140 Craftsman Engine - Parts

This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved...Read more of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.

This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburetor. Over time gaskets tend to deteriorate and would need to be replaced. It is made out of compound material and it is sold individually. You would need a screwdriver to replace this item.

The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will require a wrench set and socket set. If broken, damaged, or worn due to fatigue, there may be oil leaking from it, and the engine may be running r...Read moreough from an unwanted vacuum sucking in air. If this happens, replace the part. Refer to your make, model and diagrams to ensure this is the correct part for you.

This part is an OEM from the Briggs & Stratton manufacturer. The carburetor body gasket is made for use with many small engines. The cardboard composite item is fitted onto the carburetor, providing protection from friction and leakage. The gasket is sold individually. However, it is also included with the carburetor assembly (297684). A ...Read morescrewdriver, pair of pliers and a nutdriver are often helpful with the removal and installation.

This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise ...Read morefrom the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.

It is a genuine gasket that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This special gasket is utilized to provide an air-tight seal for the muffler, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Over time th...Read moree material may wear out and begin to crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable composite material, please note it is sold individually.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This special hardware is utilized to provide a tight seal for the carburetor, unfortunately, over time it will wear out and may begin to fail eventually requir...Read moreing a replacement. Keep in mind this high-quality item is made of durable composite material and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

This intake gasket is designed for use with various lawn and garden equipment models and is sold as an individual part. This intake gasket is used to create a tight seal for the intake manifold and engine block or cylinder head. Constructed of a composite material, this intake gasket, over time and through extended exposure to high temper...Read moreatures, compression, pressure, and simple age, can wear out and need to be replaced. When the intake gasket is worn out or damaged, it means less of a seal for the engine, resulting in air escaping and engine misfires, coupled with general performance issues. This gasket is sold as an individual part and will require a screwdriver and/or wrench to replace. Reference to the user manual for your equipment for exact placement and location of this gasket.