EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

143356 Craftsman Engine - Parts

1 - 12 of 615

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel Line Clamp – Part Number: 26460
No Longer Available
Fuel Line Clamp
Part #26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
Screw, T-30 Hex Washer Hd Sems – Part Number: 30063
$6.40
In Stock
Gasket – Part Number: 26756
$5.28
In Stock
Gasket
Part #26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Breather Gasket – Part Number: 27896A
$5.28
Special Order
Breather Gasket
Part #27896A
This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise from the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.
Air Filter (tec. 30727) – Part Number: 30727
No Longer Available
Air Filter (tec. 30727)
Part #30727
This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contaminants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.
Breather Tube – Part Number: 35350
$7.64
In Stock
Breather Tube
Part #35350
Solid State Ignition – Part Number: 34443D
$46.34
Special Order
Trimmer Spark Plug Cover – Part Number: 610118
$7.42
In Stock
Trimmer Spark Plug Cover
Part #610118
This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.
Rope-starter (98 Cut To Length – Part Number: 590535
$10.83
In Stock
Rope-starter (98 Cut To Length
Part #590535
This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman and Tecumseh pressure washers, lawn mowers, and snow blowers. When pulled, the starter rope engages starter spring causing the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. This part is made of nylon rope and is sold individually. To install the rope you will need a screwdriver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.
Cup Washer – Part Number: 34951
$6.40
In Stock
Cup Washer
Part #34951
Seal-Oil – Part Number: 27897
$3.80
Special Order
Seal-Oil
Part #27897
Spark Plug – Part Number: 33636
$8.39
In Stock
Spark Plug
Part #33636
This is a genuine OEM sourced part which is specially made for use with a variety of lawn and garden equipment. A spark plug delivers electric current from the ignition system to the internal combustion engine. Unfortunately, over time spark plugs will become dirty or fouled eventually requiring a replacement to maintain peak performance. Note, you should gap your spark plug according to the owners manual of the outdoor product you have. Keep in mind this high-quality spark plug is made of durable materials and is sold individually.
1 - 12 of 615