My Orders
1425 - Overview
Models starting with 1425
Click on the best match to narrow your results.
- 1425 (Type 2) Poulan Chainsaw (Electric Chainsaw)
- 1425 (Type 1) Poulan Chainsaw (Electric Chainsaw)
- 1425 Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425 Eureka Upright Vacuum (Vacuum Cleaner)
- 1425*0A Roper Range (GAS RANGE)
- 1425*1A Roper Range (GAS RANGE)
- 1425-1 Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-3 Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-7 Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-9 Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-B Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-F Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-P Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425-T Bissell Carpet Cleaner (Little Green ProHeat Carpet Cleaner)
- 1425^0A Whirlpool Range
- 1425^1A Whirlpool Range
- 14252 Bissell Canister Vacuum (Bissell Vacuum Cleaner Model 14252 Parts)
- 1425Q Bissell Canister Vacuum (Bissell Vacuum Cleaner Model 1425Q Parts)
- 1425W Bissell Canister Vacuum (Bissell Vacuum Cleaner Model 1425W Parts)
- 1425W0A Roper Range (Freestanding, Gas)
- 1425W1A Roper Range (Freestanding, Gas)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$56.33
In Stock
Surface Burner Element Switch, Large Burner
Part #WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove...Read more the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Read less
$22.52
In Stock
Lid Switch
Part #W10820036
This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more includes all necessary components for installation and is compatible with a wide range of top-loading washers and front-loading dryers. Installation typically involves disconnecting power, accessing the control panel or door area, and replacing the switch using standard tools. The switch is compact and designed to fit seamlessly within the appliance’s housing, with dimensions approximately 2.5 inches in length, 1 inch in width, and 1 inch in height. It features a neutral color finish that blends with most appliance interiors.
Read less
No Longer Available
Broil Element
Part #326795
This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This bro...Read moreil element is located on the inner upper wall of your oven. Be sure your element wires do not fall through the wall of your oven when you uninstall the existing part. The wires are short and will make your repair more difficult because they are difficult to retrieve.
Read less
$55.29
Special Order
Blower Belt
Part #WP691371
This dryer blower belt is designed to connect the motor to the blower wheel in compatible Whirlpool dryers, enabling proper air circulation during the drying cycle. Manufactured to OEM specifications, it ensures efficient airflow, consistent heat distribution, and optimal drying performance. A worn or broken belt can lead to symptoms such...Read more as extended drying times, lack of heat, or unusual noise. Constructed from durable, high-quality materials, this replacement part offers a secure fit and long-lasting reliability. Installation should be performed with the appliance disconnected from power, and model compatibility must be verified before replacement.
Read less
No Longer Available
$23.95
Special Order
Cutting Chain
Part #581562101
This is a genuine OEM sourced replacement part designed for use with chainsaws. It is made out of metal and it is sold individually. This is the part that fits over the bar and it is what cuts the material. Over time the chain will stretch and become dull so it will need to be replaced. To replace this chain you would need a wrench, scre...Read morewdriver and pliers. • Remove the buide bar side panel • Release the chain tension • Remove the old chain • Loosen the tensioning screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts
Read less
$30.94
In Stock
Chain
Part #581562201
This is an authentic Poulan replacement chain designed for use with chainsaws. It is a key component of a chainsaw which mechanically cuts the material. Over time the chain will stretch, become dull or break. Keep an eye on the condition of the chain and replace as needed. Please note this chain is only for use with 16" bars. Includes one...Read more (1) metal cutting chain per order. The only tool needed for this repair is the scwrench that most likely came with your chainsaw. Otherwise, a flat head screwdriver and a socket wrench will do just fine. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts
Read less
No Longer Available
STIRRER COVER ***
Part #313563
$6.95
Special Order
Bar Mounting Nut
Part #530015251
This is a genuine manufacturer-sourced replacement part, it is specially designed for use with Poulan and Husqvarna chainsaws. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. Please note this durable metal nut is sold individually.
No Longer Available
Bar Adjust Pin
Part #530023492
This metal pin is available as an individual replacement. It attaches to the left motor housing with the bar adjusting plate and helps to place tension on the bar. The pin may require a screwdriver, pliers, and a socket set to replace if it becomes broken. This is a genuine replacement part that is sourced from the original manufacturer for use with Poulan and Husqvarna chainsaws.
No Longer Available
No Longer Available
Exact Part matches for your search term
No Longer Available
No Longer Available
No Longer Available
No Longer Available
Common Symptoms of models starting with 1425
How this model fails, and the parts that fix it.
Element will not heat
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More