EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1423 - Overview

Models starting with 1423

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid Switch – Part Number: W10820036
$22.52
In Stock
Lid Switch
★★★★★
★★★★★
(17)
Part #W10820036
This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit includes all necessary components for installation and is compatible with a wide range of top-loading washers and front-loading dryers. Installation typically involves disconnecting power, accessing the control panel or door area, and replacing the switch using standard tools. The switch is compact and designed to fit seamlessly within the appliance’s housing, with dimensions approximately 2.5 inches in length, 1 inch in width, and 1 inch in height. It features a neutral color finish that blends with most appliance interiors.
Lower Dishrack Kit – Part Number: W10311986
$188.90
In Stock
Lower Dishrack Kit
★★★★★
★★★★★
(15)
Part #W10311986
The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 22-inch x 21-inch. The rack is light gray in color with wheels included, lower fold down, and a flexrow retainer. This is a genuine OEM part.
Dishrack - Rack Only – Part Number: W11169039
$127.40
On Order
Dishrack - Rack Only
★★★★★
★★★★★
(11)
Part #W11169039
This genuine dishwasher upper rack assembly provides secure, organized storage for glasses, cups, bowls, and smaller dishes while allowing water and detergent to circulate effectively for thorough cleaning. Designed to slide smoothly on the dishwasher's upper rails, it helps maximize loading space and restore proper rack function when the original rack becomes rusted, damaged, or difficult to move. This replacement rack is supplied as the rack assembly only; components such as rollers, clips, spray arms, and other attached accessories may need to be transferred from the original rack. Installation typically involves removing the rack stops, sliding the old upper rack out of the rails, transferring any required components, and sliding the new rack into place before reinstalling the rack stops. The rack measures approximately 20 inches wide, 19 inches deep, and 6 inches high.
Range Hex Nut – Part Number: WP112432
$7.47
In Stock
Range Hex Nut
Part #WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantages, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.
Engine Oil Seal – Part Number: 391086S
$8.09
In Stock
Engine Oil Seal
★★★★★
★★★★★
(1)
Part #391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "Medium" difficulty and requires a screw driver, wrench set and seal puller. A broken seal will cause a leak, and the part must be replaced. Refer to your make, model and diagram to ensure you're choosing the right part. This part comes in black and gray.
Pulley-starter – Part Number: 295871
$19.42
In Stock
Pulley-starter
Part #295871
Spring-rewind Str – Part Number: 490179
No Longer Available
Spring-rewind Str
Part #490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually. Over time, you may notice that you are having trouble retracting your pull cord, which could be a symptom of the rewind starter spring failing due to fatigue or wear. Replacing this part is a repair our customers found easy. Locate and replace the start spring inside the starter housing; no special tools are required for this job.
Broil Element – Part Number: 326795
No Longer Available
Broil Element
Part #326795
This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This broil element is located on the inner upper wall of your oven. Be sure your element wires do not fall through the wall of your oven when you uninstall the existing part. The wires are short and will make your repair more difficult because they are difficult to retrieve.
Kit-carb Overhaul – Part Number: 394693
$37.99
In Stock
Kit-carb Overhaul
Part #394693
Line-fuel – Part Number: 791745
$16.54
In Stock
Line-fuel
Part #791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.
Door Handle Spring – Part Number: 310197
No Longer Available
Door Handle Spring
Part #310197
Engine Spark Plug Boot – Part Number: 66538S
$6.40
In Stock
Engine Spark Plug Boot
Part #66538S
This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

Exact Part matches for your search term

Hex Head Cap Screw 3/8-16 x 3/4 – Part Number: 1423
No Longer Available
Hex Head Cap Screw 3/8-16 x 3/4
This part number matches the current model number 1423
Part #1423
Washer, Plain, .632 x 1.00 x .026 – Part Number: 1423
No Longer Available
Washer, Plain, .632 x 1.00 x .026
This part number matches the current model number 1423
Part #1423
BOLT, 5/16-18X2 – Part Number: 1423
$6.40
Special Order
BOLT, 5/16-18X2
This part number matches the current model number 1423
Part #1423
FT-SH-HD-TANK CAP HYD TANK CAP – Part Number: 1423
$327.52
Special Order
FT-SH-HD-TANK CAP HYD TANK CAP
This part number matches the current model number 1423
Part #1423

Common Symptoms of models starting with 1423

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid closes, switch wouldn't turn on machine.
31 of 47 people found this instruction helpful.
  • Kenneth from Wilmington, IL
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Was this helpful?
Thank you for voting!
Washer would fill up, wash, then stop
22 of 31 people found this instruction helpful.
  • Glen from Plano, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Was this helpful?
Thank you for voting!
bottom rack was starting to rust away and we needed a new one
19 of 27 people found this instruction helpful.
  • pat from muncy, PA
  • Really Easy
  • Less than 15 mins
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
Was this helpful?
Thank you for voting!