1415^1A Whirlpool Range - Overview

Diagrams for 1415^1A

See every part. Know exactly what you need.

Parts for the 1415^1A

$56.33

Surface Burner Element Switch, Large Burner

★★★★★

(56)

Part #WP3149400

This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove...Read more

Read less

$22.52

Lid Switch

★★★★★

(17)

Part #W10820036

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more

Read less

Broil Element

Part #326795

This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This bro...Read more

Read less

$55.29

Blower Belt

Part #WP691371

This dryer blower belt is designed to connect the motor to the blower wheel in compatible Whirlpool dryers, enabling proper air circulation during the drying cycle. Manufactured to OEM specifications, it ensures efficient airflow, consistent heat distribution, and optimal drying performance. A worn or broken belt can lead to symptoms such...Read more

Read less

STIRRER COVER ***

Part #313563

Trim, Bottom

Part #3181005

All 1225, 1245, 1255 2A & 3A Models

Part #331567

USE WPL 878006

Part #326136

Left

Part #329654

xSwitch-Gas Valve

Part #312457

Roller

Part #69006

All 1225, 1245, 1255 0A & 1A Models

Part #329862

Common Symptoms of the 1415^1A

How this model fails, and the parts that fix it.

Element will not heat

Oven not heating evenly

Fixed by
these parts

Show All

Videos related to models starting with 1415^1A

Watch our pros, then fix it yourself.

Replacing the Surface Burner Element Switch, Large Burner

Replacing the Lid Switch

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

the element did not turn compleatly off, the on light stayed on.

88 of 108 people found this instruction helpful.

chaz from fairplay, CO
Easy
15 - 30 mins
Screw drivers

removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. re ... Read more

Read less

Was this helpful?

Burner would go high without warning

60 of 63 people found this instruction helpful.

John from Clinton, CT
Easy
15 - 30 mins
Pliers, Screw drivers

We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task.

Was this helpful?

Left front burner would not adjust heat downward

35 of 40 people found this instruction helpful.

ALTON from ROUND ROCK, TX
Easy
15 - 30 mins
Screw drivers

Pull unit away from wall.
Unplug power
remove topmost four screws from rear metal cover
Pull knob off switch shaft.
Remove two screws holding switch to panel.
Break off shaft of new switch to correct length.
Remove each wire from old switch and attach to Corresponding lug on new switch.
Reattach the new ... Read more

Read less

Was this helpful?