141401 Weber Grill - Overview

This is an authentic Weber replacement part that has been sourced from the original manufacturer to be used with natural gas grills. The brass coupler is used to connect the fuel hose to the natural gas supply. This quick disconnect is sold as an individual replacement part, tools may not be needed to install this item.

This Weber logo is an original replacement part supplied directly from the manufacturer. It is compatible with 150+ models of Weber grills. This logo is placed on the lid of the grill. Replacing this logo will keep your machinery looking pristine. Two fasteners are included with this part.

This is a Genuine Manufacturer Sourced replacement part used on a variety of Weber Grills. This is a Metal (Aluminum) assembly used to prevent drippings and food particles from marring your deck or patio.

This is an authentic OEM sourced replacement part designed for use with Weber grills. These rails are used to hold the grease/drip funnel tray to the underside of the grill so you can slide the tray in and out for easy cleaning. This set includes two (2) aluminum bottom tray rails with four (4) screws used to mount rails. To complete this repair you will need a screwdriver.

This is an authentic kit made for the lid on Weber grills. This is a 14-part set that includes two posts, two retaining clips, and ten hex nuts. The posts are used to secure the lid to the body of the grill while allowing it to swing freely as a hinge. The ends of the posts have small holes that the retaining clips slide into to keep them in place.

This is an original Weber part manufactured for use with outdoor grills. The control panel plugs with screws fasten the control panel to the side frame. Only two plugs are required to secure the control panel, and this set will include both plugs, and two screws, please note the set is sold individually.

This is a Genuine Weber replacement part designed for their Grills. Kit includes: push-button igniter, gas-catcher ignition chamber, white wire, black wire, and instruction sheet. Hassle-free installation enabled by easy-to-follow instructional guide

This authentic ignition chamber assembly is specially designed for Weber Grills. It is supplied directly from original equipment manufacturer and it is sold individually. Igniter produces the spark to ignite the burner. Please note the igniter switch with a button is sold separately. Replacing this electronic ignition module is easy and ...Read moredoes not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Connect the wires and test the unit