14-6 - Parts

This chrome drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to catch the drips and spills coming from the cookware on your stove. Burners are used frequently and these pans can get quite dirty. If y...Read moreours will no longer come clean, or if it is damaged, this is the replacement you need. Before putting the burner head assembly and burner grate back on, make sure the drip pan is flush with the cooktop. When repairing your range or cooktop, make sure it is unplugged and the gas is shut off.

This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and in...Read morecludes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.

This round chrome drip pan is 8 1/2 inches in diameter with a center hole of 3 1/4 inches wide. This drip pan is used for gas burners.

This is a genuine OEM replacement part, it is sold individually. This Key is needed to operate all of the models listed below. It is inserted into the switch to make it possible for the machine to turn on. It can be removed for the purpose of unauthorized use of the machine.

The stabilizer attaches to the ball stud. This is an OEM part sourced directly from the manufacturer and used in Delta mortisers. This item is priced individually and is made of metal. A screwdriver might be necessary during the installation of this part. It will need to be replaced if it breaks.

This round burner grate measures seven and a half inches in diameter. Use it with your Frigidaire/WCI brand gas range.

This is a Genuine OEM Sourced replacement part used on Delta Power Equipment. This switch has a Plastic Body. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Please note the Switch Box an...Read mored the Cover are Sold Separately. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing