My Orders
13AI608H401 MTD Lawn Tractor - Overview
Diagrams for 13AI608H401
See every part. Know exactly what you need.
-
46"/42" cutting decks
-
46"/42" cutting decks page 2
-
Drive system
-
Drive system page 2
-
Electrical
-
Engine accessories
-
Engine accessories page 2
-
Lift assembly
-
Power take-off system
-
Power take-off system page 2
-
Single-speed transmission
-
Single-speed transmission page 2
-
Steering assembly
-
Steering assembly page 2
-
Tractor body
-
Tractor body page 2
-
Tractor body page 3
-
Tractor body page 4
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Lawn Mower Flange Bearing
Part #741-0660A
This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an inner diameter of .76 inches, an outer diameter of .941 inches, and a width of 1 inch. It is made of plastic. A similar similar style flange b...Read moreearing can be used at the bottom of the crank, but it would be made of metal. When the bearing is broken, you may notice signs of wear and abnormal squealing noises coming from your machine. If neglected, the parts the bearing is supporting can overheat and potentially seize up. To switch out a flange bearing, you need to take off any bolts, screws, or clips that are holding it in place. Using a hammer or a bearing puller tool, gently push the bearing out of its housing. Since this part is sold individually, remember to refer to your user manual to understand how many bearings your machine will need. It is strongly recommended that you replace all the bearings in one go, as they wear out at the same rate.
Read less
$24.45
In Stock
Lawn Mower Key
Part #925-1745A
This manufacturer-certified Ignition Key comes in black/silver and is used in the ignition slot to turn on the engine. If your key becomes damaged or lost (which these small keys easily are), this part will be an exact replacement. It is made of metal and is sold individually.
$16.91
In Stock
Lawn Mower Steering Pinion Gear
Part #717-1554
This steering gear is an original part from Craftsman for lawn tractors. This piece is part of the tractors steering mechanism. This steering gear maneuvers the steering sector gear to move the lawn tractor wheels right or left. You will need a socket set to replace this part. This steering gear is made of metal and sold individually.
$58.42
In Stock
Lawn Mower Variable-Speed Belt
Part #954-0467A
This is a Genuine replacement Belt designed for use with Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the the Belt that drives your unit.
Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically an...Read mored replace it when worn or stretched to maintain peak performance.
You would need a Wrench set and Pliers to replace this belt.
• For your safety make sure to disconnect the spark plug wire.
• Loosen the transaxle pulley
• Relieve tension on the upper drive belt
• Remove the upper drive belt and lawn mower belt guide
• Secure the new belt
• Reassemble and tighten the pulleys
Read less
$36.85
In Stock
Mulching Blade
Part #942-0616A
Dimension: 21.23-Inch
This is a Genuine Manufacturer Approved Blade used on Riding Mower/Lawn Tractor. This Blade is sold Individually. It is a 3-in-1 blade for mulch, bag and side discharge purposes. This part is designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulc...Read moreh since the smaller clippings will decompose more quickly, releasing their nutrients into the soil.
Read less
$6.47
In Stock
Screw Shldr..30x46
Part #710-1650
This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Metal and is Sold Individually. Requires a Wrench to tighten or loosen.
$6.40
Special Order
Lawn Mower Hex Flange Bearing
Part #941-0656A
$10.54
In Stock
Lawn Mower Plastic Flange Bearing
Part #741-0487C
Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually.
When this part malfunctions, you may notice the shaft becomes very sloppy or comes...Read more disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers.
Customers rate this repair as Medium difficulty.
Read less
$35.80
In Stock
Belt-drive Transm
Part #954-0468
This replacement upper drive belt is a genuine part. It is supplied from original equipment manufacturer for use with riding lawn mowers/tractors. This is one of the belts that drives the mower. When installing a new belt, make sure to clean pulleys to ensure top performance and longevity of your new belt. Inspect belt periodically and re...Read moreplace it when worn or stretched. This part is made out of rubber and it is sold individually. To complete this repair you will need a set of wrenches.
Read less
$9.99
In Stock
Use 712-0417a
Part #712-0417A
$10.54
In Stock
Lawn Mower Brake Puck
Part #917-0678
When the brakes are applied, this brake puck presses against the brake disc in your lawn equipment to help slow down or stop it. The brake puck is in the brake assembly, which might be located near the transmission or the wheels of your machine. If you notice that the machine takes longer to stop or that there is a loud scraping or grindi...Read moreng noise when you push down on the brake, your brake puck may have worn out. If it is not replaced, you risk losing braking power, which leads to equipment damage or accidents. Before any repairs, make sure that your machine is turned off and that the spark plug is disconnected. To dissemble the brake assembly and access the brake puck, use pliers or a wrench to remove any bolts or clips holding it in place. With a screwdriver, pry the brake puck out of your machine. Since this genuine OEM part is sold individually, determine the number of pucks your machine needs by consulting your user manual.
Read less
$31.58
In Stock
Lawn Mower Solenoid
Part #925-1426A
This starter solenoid is designed to reliably engage the starter motor by allowing a low-power ignition signal to trigger the high-current starting circuit. Built for dependable performance, it helps resolve no-start or intermittent starting issues caused by a failed relay. Ideal for replacing a worn or faulty solenoid, it restores consis...Read moretent starting and reliable operation in lawn mowers, tractors, and snow-clearing equipment.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More