My Orders
- Home
- 13AG601H729
- Instructions
13AG601H729 (2005) MTD Lawn Tractor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
i NEEDED A DRIVE BELT FOR MY RIDING MOWER
14 of 19 people
found this instruction helpful.
-
TERRY from OAK CREEK, WI
- Very Difficult
- More than 2 hours
1) DON'T ORDER FROM THESE IDIOTS.
2) THEY SENT THE WRONG BELT
3) THEY HAVE A CUSTOMER -NO- SERVICE NUMBER.
4) CAN'T GET A GOODS RETURN ONLINE
2) THEY SENT THE WRONG BELT
3) THEY HAVE A CUSTOMER -NO- SERVICE NUMBER.
4) CAN'T GET A GOODS RETURN ONLINE
Was this helpful?
Thank you for voting!
Didn't line up very easy
2 of 4 people
found this instruction helpful.
-
michael from eden, NC
- A Bit Difficult
- Less than 15 mins
Put one side in bottom first and you have to slightly twist the lens to get the other clips to pop in.
Was this helpful?
Thank you for voting!
Mixer began to make a noise on speed two and higher
8 of 31 people
found this instruction helpful.
-
LISA M from BATESVILLE, AR
- Really Easy
- Less than 15 mins
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this helpful?
Thank you for voting!