13AC26JD058 (2016) Murray Lawn Tractor - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an inner diameter of .76 inches, an outer diameter of .941 inches, and a width of 1 inch. It is made of plastic. A similar similar style flange b...Read moreearing can be used at the bottom of the crank, but it would be made of metal. When the bearing is broken, you may notice signs of wear and abnormal squealing noises coming from your machine. If neglected, the parts the bearing is supporting can overheat and potentially seize up. To switch out a flange bearing, you need to take off any bolts, screws, or clips that are holding it in place. Using a hammer or a bearing puller tool, gently push the bearing out of its housing. Since this part is sold individually, remember to refer to your user manual to understand how many bearings your machine will need. It is strongly recommended that you replace all the bearings in one go, as they wear out at the same rate.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

This steering gear is an original part from Craftsman for lawn tractors. This piece is part of the tractors steering mechanism. This steering gear maneuvers the steering sector gear to move the lawn tractor wheels right or left. You will need a socket set to replace this part. This steering gear is made of metal and sold individually.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

Original Manufacturer Approved replacement Spindle Assembly 6.3 Diameter used on Lawn Tractors/Mowers. Includes Housing, Shaft assembly, Bearing, Pulley and nut. The mounting holes on the Mandrel are not threaded. But the bolts that are used to secure the mandrel to the deck are self tapping. The Mandrel shaft goes thru the deck and the p...Read moreulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Tecumseh and Troy-Bilt riding lawn mowers. The Chute deflector covers the discharge port on the mower deck and directs the grass clippings away from the mower. This part is made of durable plastic and is sold individually. For install...Read moreation, you will need a screwdriver and a socket wrench. Before starting this repair, engage the parking brake and remove the spark plug and boot wire for the mower.

This is an original Craftsman replacement part manufactured for use with lawn and garden equipment. The wing knob acts as a nut to fasten bolts. This wing knob is a versatile part that is used on lawnmowers, and snowblowers. The wing knob usually secures the bolt that fastens the upper and lower handles, please see model diagram for part location. The wing knob is sold individually.

It is an authentic OEM supplied replacement push cap that is commonly utilized on riding lawn mowers and tractors. This is the push cap that is secured over the flange bearing, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic cap is included per order.