137R Ryobi Trimmer - Overview

This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no ...Read morelonger feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.

This is a genuine OEM replacement part, it is sold individually. The propose of the Reel and Line Assembly is to dispense the cutting line for the trimmer models below. This is a dual line trimmer. The diameter of the line used in this reel is 0.080

Genuine OEM replacement part, this item is sold individually. The 791-181459 Spring is installed in the 753-04257 slider. When not activated this part will keep the cutting line from coming out of the spool. When the Bump Head Knob Assembly is hit on the ground the springs and slider will be forced up into the spool housing releasing the ...Read morecorrect amount of cutting line. Most of the trimmers will use two of these springs.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.

Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

Is your dishwasher door not staying shut? That's frustrating! The 2 Door Latch could be just the fix you need. It's a small yet highly important part that makes sure your dishwasher door stays tightly closed while your machine 2ts to work on your dishes. Placed at the top of your door, it's the hero behind the scenes, ensuring perfect eff...Read moreiciency every time. But why is it so crucial? Well, without a properly latching door, your once trustworthy dishwasher can ineffective or even unsafe. With the 2 Door Latch, you can return your machine back to its former glory, working smoothly like brand new. The good news? You don't need to call a professional! Installation is so straightforward, you can do it yourself. Just remember to switch off your power supply first, as safety always comes first. In addition, it might be wise to wear work gloves to protect your hands. So, take the worry out of dishwashing. With the 2 Door Latch, it?s super easy to 2t your dishwasher running perfectly again. Trust us, your dishwasher will thank you.

The metal spring goes between the e-clip and the plunger and helps to maintain tension. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. This is a small part that will need to be replaced if it becomes lost or stretched and may require a screwdriver to install the spring. This is available as an individual replacement part.

It is an authentic OEM sourced part which is made for use with handheld trimmers. This is the special component which provides a tight fit for the outer spool. Unfortunately, over time the hardware may get damaged or lost eventually requiring a replacement. One durable metal retainer is included. Refer to the appropriate diagrams for your...Read more model for the exact location and the correct application. You may need snap-ring pliers to perform this repair.