Models > 136-511-100

136-511-100 ((1986)) Cub Cadet Lawn Mower - Overview

Sections of the 136-511-100

[Viewing 1 of 1]
Diagram and Parts List for (1986) Cub Cadet Lawn Mower
Keep searches simple, eg. "belt" or "pump".
Gasket--Exhaust – Part Number: 692236
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
  In Stock
Gasket- Exhaust – Part Number: 692237
Gasket- Exhaust
★★★★★
★★★★★
(1)
PartSelect #: PS9294810
Manufacturer #: 692237
$5.71
  In Stock
Brake Puck (Sold Individually) – Part Number: 917-0678
Brake Puck (Sold Individually)
PartSelect #: PS9165951
Manufacturer #: 917-0678
When the brakes are applied, this brake puck presses against the brake disc in your lawn equipment to help slow down or stop it. The brake puck is in the brake assembly, which might be located near th...
$7.91
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Air Valve – Part Number: 934-0255
Air Valve
PartSelect #: PS9311038
Manufacturer #: 934-0255
$4.41
  In Stock
Belt – Part Number: 954-05040
Belt
PartSelect #: PS10035504
Manufacturer #: 954-05040
$48.83
  In Stock
Hex Flange Brg. .630" I.D. – Part Number: 941-0225
Hex Flange Brg. .630" I.D.
PartSelect #: PS9311574
Manufacturer #: 941-0225
The Hex Flange bearing, .630 inches I.D. is an OEM part. Black in color and made of metal, it is sold individually. It is installed using a wrench or socket and its installation has been rated as Easy...
$7.55
  In Stock
Hi-Pro Key, 3/16 x 5/8 – Part Number: 914-0161
Hi-Pro Key, 3/16 x 5/8
PartSelect #: PS9155193
Manufacturer #: 914-0161
This authentic OEM hi-pro key, also called a woodruff key or key stock, is a metal component found in your lawn equipment that connects rotating parts. It is 3/16 inch wide and 5/8 inch long. It fits ...
$4.40
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
Hex Nut 5/16-18 – Part Number: 912-3010
Hex Nut 5/16-18
PartSelect #: PS9309225
Manufacturer #: 912-3010
$3.29
  Special Order
Hairpin Clip – Part Number: 914-0145
Hairpin Clip
PartSelect #: PS9152676
Manufacturer #: 914-0145
$4.11
  Special Order
Needle Bearing,.625 X.813 X.495 – Part Number: 941-0335
Needle Bearing,.625 X.813 X.495
PartSelect #: PS9166794
Manufacturer #: 941-0335
$19.43
  In Stock
View More
Back to Top

Questions And Answers for 136-511-100

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top