1348L66 Roper Range Parts & Repair Help | PartSelect
Models > 1348L66

1348L66 Roper Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(11)
PartSelect #:PS360921
Manufacturer #:4342528
This round style gas oven igniter, or also known as a broil or bake igniter, has an amperage range between 2.5 and 3.0. It glows white hot to ignite the gas for the oven. The ignit...
$53.93
In Stock
Order within the next 10 hrs and your part ships today!
PartSelect #:PS359810
Manufacturer #:4331308
No Longer Available
PartSelect #:PS372663
Manufacturer #:4389958
No Longer Available
PartSelect #:PS359715
Manufacturer #:4328835
No Longer Available
PartSelect #:PS359957
Manufacturer #:4333519
No Longer Available
PartSelect #:PS359968
Manufacturer #:4333698
No Longer Available
Questions and Answers for 1348L66
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lower burner would not ignite.

  • Customer: Mark from Rego Park, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 78 of 83 people found this instruction helpful
First I removed the oven racks. Then I loosened the two screws in the back of the oven floor and figured out how to remove it. Then I loosened the two screws at the front of the diverter and, with some pushing and pulling and twisting, was able to get that to come out, too. Then I tried lighting the oven and noticed that the igniter was not glowing. When... read more

oven would not ignite

  • Customer: Gary from Caldwell, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 10 of 11 people found this instruction helpful
removed broiler pan
removed oven bottom plate
removed burner cover
unplug and remove igniter
reinstall igniter
clean and reassemble read more

Oven wouldn't light (gas)

  • Customer: David from El Paso, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 10 of 12 people found this instruction helpful
Removed racks and floor in oven, exposing ignitor assembly. Disconnected 2 wires at electrical connector plug. Removed 2 screws holding ignitor in place, removed bad ignitor, installed new ignitor in reverse order. Tested for ignition, all worked fine. read more