1340G (936022000101-) Ariens Lawn Tractor - Overview

This roll pin is a genuine OEM part that is designed for use with various makes and models of snowblowers and lawn tractor snowblower attachments. Made of metal and sold as an individual part, this pin features a 0.25-inch diameter and 1.75-inch length. This pin is hollow and features a split lengthwise down the middle to allow it to fit ...Read morewithin tighter spaces and reduce the movement between two parts, such as the shaft or axle. If your snowblower is not performing well or has seen a decrease in power, check to make sure the roll pin is not damaged. To remove and install a new roll pin, you will need a hammer and a punch, and will simply need to punch out the old pin and punch in the new one.

This authentic part is supplied by the original manufacturer for use with Ariens lawn and garden equipment. The flange bushing helps to provide a tight seal between connected parts while allowing for movement with minimum friction. Over time it may wear out, get damaged or lost eventually requiring a replacement. This high-quality flange ...Read morebushing is made of durable material and is sold individually. A screwdriver, pliers and a wrench set might be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This is an authentic OEM part. This key is made of molded plastic and metal and is designed for use with Ariens snowblowers and snow tractors. It is used to start the machine and functions as a safety feature to prevent unauthorized use. This item is sold individually.

This item is sold individually and is made of metal. The flange bushing attaches to the flat steel washer and the wheel. A set of pliers, a socket set, and a screwdriver might be needed during the installation process. Over time this part may break and will need to be replaced. This is a genuine Ariens part sourced directly from the manufacturer for use in snowblowers and lawn tractors.

This part is sourced directly from the manufacturer, is not part of a kit or assembly, and is sold individually. The Bushing is made of durable black rubber and is usually found on the fuel tank. Through regular use, the Bushing may become worn, damaged, or dried out, at which point it will need to be replaced. Customers rate this repair as Easy.

This PTO switch assembly is designed for riding lawn mowers to control engagement and disengagement of the cutting blades. Featuring a durable yellow knob with integrated switching components, it provides clear, reliable operation for safe mower use. It’s a practical replacement for restoring consistent blade control and dependable deck operation when the original switch becomes worn or unresponsive.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This authentic item is sourced directly from the original equipment manufacturer for use with Ariens riding lawn mowers and garden tractors. It is an identical replacement for a missing or a faulty roller that was installed on a new unit. The part helps to support the deck, please make sure to refer to the appropriate diagrams of your mod...Read moreel for the correct location and application of this component. This high-quality part is made of durable rubber and is sold individually. Keep in mind the #02747651 Roller Clevis , the #02747500 Pin, Clevis and the #05503600 Flange Bushing are all sold separately.

This tension spring, also known as a coil spring or extension spring, is an authentic manufacturer replacement part used in a variety of outdoor power equipment. It is a cylindrical, steel spring with one hook/ring on each end, which is used to hook on to the equipment parts. The spring is responsible for providing tension or resistance t...Read moreo various parts for controlled movement and added stability. It is typically located in areas such as throttle controls, idler pulleys, and belts. The tension spring can rust or break over time, leading to loose components, equipment instability, and potentially causing damage. To remove and replace the tension spring, use needle nose pliers or a spring hook tool to grab the hooks and gently pry them off. Hook the new spring on the attachment points and ensure that it can maintain the required tension.