Models > 133452-0049-01

133452-0049-01 Briggs and Stratton Engine - Overview

Sections of the 133452-0049-01

[Viewing 10 of 10]
Air Cleaner Muffler
Alternator Controls Governor Spring Ignition
Blower HousingShrouds Flywheel Groups
Cam Crankshaft Piston Group Valves
Carburetor Group KitsGasket Sets-Carburetor
Crankcase Cover
Cylinder Head KitsGaskets Sets - Valves
Electric Starter Rewind Group
Fuel Tank Group KitsGasket Sets-Engine
Gear Reducer Oil Group
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.42
  In Stock
Carburetor Overhaul Kit – Part Number: 498260
Carburetor Overhaul Kit
★★★★★
★★★★★
(4)
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$21.42
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$4.90
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.94
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
$7.41
  In Stock
Filter – Part Number: 298090S
Filter
PartSelect #: PS9275043
Manufacturer #: 298090S
$5.61
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.82
  In Stock
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.29
  In Stock
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.18
  In Stock
Gasket-Intake – Part Number: 273113S
Gasket-Intake
PartSelect #: PS8941262
Manufacturer #: 273113S
$6.21
  In Stock
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.53
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$3.10
  In Stock
Back to Top View More

Questions And Answers for 133452-0049-01

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 133452-0049-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More