Models > 13340

13340 - Overview

Models starting with 13340

Exact Part matches for your search term

[Viewing 3 of 3]
DISCONTINUED – Part Number: 355T480S02
DISCONTINUED
This part number matches the current model number 13340
PartSelect #: PS822634
Manufacturer #: 355T480S02
  No Longer Available
ASY FILTER CAPACITORS – Part Number: 13340
ASY FILTER CAPACITORS
This part number matches the current model number 13340
PartSelect #: PS4258683
Manufacturer #: 13340
  No Longer Available
Guide – Part Number: 13340
Guide
This part number matches the current model number 13340
PartSelect #: PS12422388
Manufacturer #: 13340
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.42
  In Stock
Carburetor Overhaul Kit – Part Number: 498260
Carburetor Overhaul Kit
★★★★★
★★★★★
(4)
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$21.42
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$4.90
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.94
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
$7.41
  On Order
Filter – Part Number: 298090S
Filter
PartSelect #: PS9275043
Manufacturer #: 298090S
$5.61
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.82
  In Stock
Leveling Leg – Part Number: WB2X8248
Leveling Leg
PartSelect #: PS242986
Manufacturer #: WB2X8248
  No Longer Available
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.29
  In Stock
Door Gasket – Part Number: WB2X2058
Door Gasket
PartSelect #: PS241985
Manufacturer #: WB2X2058
$121.05
  In Stock
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.18
  In Stock

Common Symptoms of models starting with 13340

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove entire oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Parts Used:
Door Gasket
  • JoAnn from Auburn, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
19 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Gasket Worn and Brittle
Took oven door off. Removed screws that were holding oven insert. Pulled out oven insert. Removed old gasket. Installed new gasket. Push oven insert back. Installed screws. Replaced oven door.
Parts Used:
Door Gasket
  • Karen from Yakima, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!