130C Husqvarna Trimmer - Overview

The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue, the engine will not engaged when the rope is pulled, and the part should be replaced. Installation is rated as easy and requires a screwdrv...Read moreier, pliers and nutdriver. Refer to your make, model and diagram to check if this part is correct. This part is metal, individually sold, and comes in gold.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Poulan and Husqvarna lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality item is made of durable metal and is sold individually.

This fuel filter assembly draws fuel from the tank and delivers it to the engine while helping keep contaminants out of the system. Designed with a durable housing and integrated filtration, it supports clean fuel flow and reliable engine performance. Replacing a clogged or worn filter can improve operation, protect internal components, and restore consistent performance.

This Bolt is used to secure parts in place and will require a wrench or socket. This is an OEM bolt from the original manufacturer and has a range of applications depending on the part you are securing. Generally, though, customers rated its installation as easy.

This is a genuine manufacturer sourced replacement part that is specially produced for use with Poulan and Weed Eater trimmers. It is an identical replacement for a missing or a faulty spring that was installed on a new unit. This spring helps to apply tension on the trimmer head, please make sure to refer to the appropriate diagram of yo...Read moreur model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for handheld lawn and garden equipment. The wrist pin retainer is an important component which helps to secure the piston pin. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new ...Read moreunit. Note, this high-quality wrist pin retainer is made of durable metal and is sold as an individual item. Keep in mind, the pin is all sold separately. A screwdriver, a wrench set, and pliers will be needed to perform this repair. To ensure the correct replacement procedure, refer to the appropriate diagrams for your model.

This part is available as an individual replacement. The cutting head is made out of plastic and metal. No tools should be required during installation. It will need to be replaced if it becomes broken. This is an OEM Husqvarna part directly sourced from the manufacturer for use in trimmers.