13052X6A Murray Edger - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This is a genuine Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind edgers. The belt links the motor's drive shaft and the blade's quill assembly. This item allows the blade and the drive shaft to rotate in unison. This belt is priced as a single item.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is an authentic OEM sourced replacement part designed for use with Murray edgers. It is purpose is to cut grass, making it perfect for edging level ground around sidewalks and driveways. If the blade becomes dull or damaged it should be replaced to effectively cut the grass. This blade is made from durable high quality metal and it is sold individually.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

Screw hex 1/4-20x.5

This is a genuine Murray replacement part. The washer is commonly found in lawn tractors and edgers. This part is made of metal, and is generally used to provide a secure seat for screws and bolts. It may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the mach...Read moreine. Refer to the parts diagram to be sure of ordering the correct part. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

Nut-.31-18 reg hex zi