My Orders
12AVB2M7059 (2011) MTD Lawn Mower - Overview
Diagrams for 12AVB2M7059
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$58.89
In Stock
Grass Catcher Frame Assembly
Part #647-04271-0637
This genuine black steel grass bag frame supports the cloth catcher bag on select walk-behind lawn mowers with 21-inch decks. It holds the bag open while grass clippings enter from the mower deck. This package includes one frame only, the cloth bag is sold separately. Confirm the grass bag frame is compatible with your model before ordering.
$24.77
Special Order
CHUTE-SIDE DISCHAR
Part #731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, it must be replaced. Refer to your make, model, and diagram to ensure this is the right part for you.
$26.53
Special Order
Side Chute
Part #731-07486
This genuine manufacturer-sourced part is specially designed for use with Craftsman lawn mowers. It is mounted to the side of the mower to direct grass clippings. The chute provides an identical replacement for a missing or a damaged component that was included with a new unit. Please make sure to check the owners manual of your model for...Read more the correct location and application of this component. Keep in mind this high-quality side chute is made of durable plastic and is sold individually.
Read less
$6.40
In Stock
Bell Blade Support
Part #736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.
Read less
$6.47
In Stock
Screw
Part #710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.
$7.04
In Stock
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
Part #710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.
$8.99
In Stock
$56.49
In Stock
Lawn Mower Blade Adapter
Part #687-02528
This is an authentic OEM sourced replacement part that is intended to be used with lawnmowers from Troy-Bilt, Yard-Man, and MTD. The blade adapter is used to link the motor pulley, blade, and the belt to allow the drive shaft to rotate the blade. This item is available as an individual replacement part.
$6.47
Special Order
Shoulder Screw
Part #738-04419A
This shoulder screw is sourced directly from original equipment manufacturer. It is an authentic item specially designed for use with a variety of lawn and garden equipment. It is commonly used to secure the upper and lower handles together. Please make sure to check appropriate diagrams for your unit to verify location and application of...Read more this screw. This part is made out of metal and it is sold individually. Please note, the locknut is sold separately. You will need a wrench when installing or removing this shoulder screw.
Read less
$6.40
In Stock
Hinge Pine
Part #747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move.
If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.
Read less
$6.74
In Stock
Wsh, Bell., .34 x .872 x .06
Part #736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft.
If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part.
Customers rate the difficulty of this repair as Medium.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More