12ALC3B3707 Snapper Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Trailing shield

The mulching blade fits between the blade support and the engine baffle. It is made of metal and is priced individually. It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper walk-behind mowers. During the installation process, a socket set may be required. If this blade becomes broken or cracked it will need to be replaced.

Blade adapter

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal support is used to secure the mower's blade to the blade adapter assembly. This blade support is available as an individual replacement part. A hex socket wrench is needed to install this part.

Screw hex 1/4-20x.5

This is the special bolt-hex which is utilized to secure the mower blade. It is an identical replacement for the hardware that was installed on a new equipment. Check the owner\'s manual and the parts diagrams for your specific model to ensure the correct replacement procedure. This high-quality bolt-hex is made of durable metal and is so...Read moreld as an individual item. It is supplied by the original manufacturer for Murray and Snapper lawn mowers. Note, a wrench will be needed to secure or remove it.

This is a genuine part that is supplied by the original manufacturer for use with Snapper walk behind mowers. The V belt connects the engine pulley to the transmission pulley, to propel the mower forward. This part is made of rubber and is sold individually. You will need a socket wrench to remove any covers or shrouds on the unit. Use a screwdriver to pull the idler pulley up and place the belt underneath it.

This is an authentic replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The metal frame connects to the rear of the deck and is used to provide a structure for the grass collection bag. This item is available as an individual replacement part.