12A-445D701 (2004) Yard Man Lawn Mower - Overview

This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an angled design that promotes optimal airflow, allowing grass clippings to circulate through the cutting deck for effective side discharge and m...Read moreulching. Over time, mower blades can dull or wear down, leading to torn grass blades and a less polished lawn appearance. Replacing a worn blade with this high-quality part ensures a sharper, cleaner cut that keeps your lawn looking its best. This blade is sold individually.

The Control Handle is an OEM, metal, black handle used to control the engine. It attaches onto the handle assembly of the mower. If broken you will no longer be able to control the engine, and the part will need to be replaced. Most of our customers rated this repair as easy.

The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.

This walk-behind mower drive belt transfers power from the engine pulley to the transmission, allowing the self-propelled front wheels to move the mower forward. Replacing a worn or stretched belt helps restore smooth drive engagement and consistent forward motion. Ideal for repairs when the mower slips, loses traction, or no longer self-propels reliably.

This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.

This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Metal and is Sold Individually. Requires a Wrench to tighten or loosen.

This is the lower handle for various models of walk-behind lawn mowers. This handle is made of durable black metal and attaches directly to the rear of the lawn mower. This handle is an OEM part that is sold by itself and does not come with any hardware or other parts. If your current lower lawn mower handle is corroded or damaged, it nee...Read moreds to be replaced immediately so you can properly and safely handle your lawn mower. This handle measures approximately 24.5-inches long and 17-inches wide and connects the rear of the lawn mower with the upper and main handle that the user holds when operating the lawn mower. Replacing this handle will not require any tools but must start with turning off the lawn mower. Loosen and remove the knobs around the handle, including the ones connecting the lower handle to the mower and those securing the upper and lower handles. Once each knob is removed, replace the old lower handle with the new one, and resecure • all the knobs onto the handle(s).

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. Th...Read moreis part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.

This grass bag is a genuine manufacturer sourced replacement item. It is commonly used on a variety of walk-behind lawn mowers. It is designed to collect the grass trimmings for easy disposal. It is made out of fabric material and it is sold individually. Please note, this includes only the bag itself, the metal frame is sold separately.

This is a genuine manufacturer sourced replacement part designed for use with walk behind lawn mowers. It is used to secure the blade to the spindle/shaft. This part is made out of metal and it is sold individually. Requires a wrench to tighten/loosen this screw.

This is an authentic item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty dowel pin that was installed on a new unit. The pin helps to secure the gear, please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this hardware. Keep in mind this high-quality pin is made of durable metal and is sold individually.