125RB Husqvarna - Overview

This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This is a genuine OEM approved replacement part designed for use with Husqvarna lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time...Read more the primer will lose its elasticity or crack and need to be replaced. It is made out of rubber and it is sold individually.

This is an authentic OEM sourced replacement part used on Husqvarna trimmers and brushcutters. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. Please note this high quality foam air filter is sold individually. To replace it no special tools needed, simply remove the cover and replace the filter element.

This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.

This is an authentic replacement part manufactured for use with Husqvarna trimmers and brushcutters. Fuel lines can become brittle and crack and will need to be replaced to prevent fuel leaks. The hose is sold as an individual replacement part, please see model diagram for associative parts.

This is a genuine manufacturer-sourced part that is specially designed for Husqvarna handheld lawn and garden equipment. This grommet fits in the fuel tank and it helps to secure the hose, unfortunately, over time the material may wear out and even begin to crack eventually requiring a replacement. Keep in mind it is made of high-quality ...Read morerubber and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this item.

This authentic replacement part is designed for use with Husqvarna lawn and garden equipment. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pres...Read moresure, heat, vibration and friction, because of this, many bearings need to be periodically replaced. Please note this high-quality component is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

This is an authentic replacement part manufactured for use with Husqvarna outdoor power equipment. The clip is commonly used to secure the fuel lines at the fuel tank. This clip is sold as an individual replacement part, please see model diagram for associative parts.

This is a genuine manufacturer-sourced component which is specially designed for use with Husqvarna handheld trimmers and brushcutters. It is an identical replacement for a missing or a faulty hose that was installed on a new unit. The hose is utilized to deliver the fuel. Please make sure to refer to the owners manual and the appropriate...Read more diagrams of your model for the correct location and application of this part. Keep in mind this high-quality hose is made of durable rubber material and is sold individually.