1259C16 Whirlpool Range Parts & Repair Help | PartSelect
Models > 1259C16
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(14)
PartSelect #:PS11740783
Manufacturer #:WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your...
$50.80
In Stock
(7)
PartSelect #:PS360921
Manufacturer #:4342528
This round style gas oven igniter, or also known as a broil or bake igniter, has an amperage range between 2.5 and 3.0. It glows white hot to ignite the gas for the oven. The ignit...
$47.90
In Stock
PartSelect #:PS369615
Manufacturer #:4372836
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$158.16
In Stock
PartSelect #:PS359781
Manufacturer #:4330786
This single round chrome drip pan is 7-7/16 inches in diameter. Its center hole has a diameter of three and a half inches wide. Use this chrome drip pan for your Whirlpool brand ga...
No Longer Available
PartSelect #:PS359810
Manufacturer #:4331308
No Longer Available
PartSelect #:PS359748
Manufacturer #:4329749
No Longer Available
PartSelect #:PS359765
Manufacturer #:4330126
No Longer Available
PartSelect #:PS359766
Manufacturer #:4330147
No Longer Available
PartSelect #:PS359767
Manufacturer #:4330151
No Longer Available
PartSelect #:PS877619
Manufacturer #:4328798
No Longer Available
Questions and Answers for 1259C16
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lower burner would not ignite.

  • Customer: Mark from Rego Park, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 76 of 81 people found this instruction helpful
First I removed the oven racks. Then I loosened the two screws in the back of the oven floor and figured out how to remove it. Then I loosened the two screws at the front of the diverter and, with some pushing and pulling and twisting, was able to get that to come out, too. Then I tried lighting the oven and noticed that the igniter was not glowing. When... read more

the element did not turn compleatly off, the on light stayed on.

  • Customer: chaz from fairplay, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 72 of 81 people found this instruction helpful
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire fro... read more

Burner would go high without warning

  • Customer: John from Clinton, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 45 of 46 people found this instruction helpful
We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task. read more