This grommet is used in a number of household appliances. Most often it is used in the dishwasher as part of the assembly that mounts and holds the heating element in place. This replacement part is made out of rubber, which helps create a seal between the element and the appliance. This grommet is sold individually. If you are replacing ...Read morethe heating element, or the brass nut that holds it in place, we recommend you replace the grommet at the same time. Before you begin any repair work on your dishwasher, make sure you have unplugged it and shut off the water supply.
This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass thr...Read moreough it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.
This part is a rack roller for the dishrack in your dishwasher. This rack roller is meant to be used on the lower dishrack. It is completely white and made entirely of plastic. This part has a diameter of about 1.5 inches, and a height of just over an inch. The support for this roller is available separately. Take note that this part is s...Read moreold individually. The most common reason for needing to replace this roller is if your current one is broken and is causing your lower dishrack to stick.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaked Water
15 of 25 peoplefound this instruction helpful.
Jack from Soddy Daisy, TN
Easy
15 - 30 mins
First I removed the old seal and comparied it with the new one and they were the same. Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now.
Was this helpful?
Thank you for voting!
No Rinse cycle
3 of 5 peoplefound this instruction helpful.
Tim from Forest Grove, OR
Easy
Less than 15 mins
Screw drivers
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done.
Was this helpful?
Thank you for voting!
No problems encountered
2 of 2 peoplefound this instruction helpful.
Calvin from LOVINGTON, NM
Very Easy
15 - 30 mins
There were 4 zip ties holding old silverware basket on to bottom rack snip them, remove basket install new basket with zip ties both ends 2 more in middle about 1-2” apart. Try to install ties about 1/2 way up on basket so it doesn’t get top heavy.