Models > 1234*0A

1234*0A Roper Range - Overview

Sections of the 1234*0A

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Lid Switch – Part Number: W10820036
Lid Switch
★★★★★
★★★★★
(16)
PartSelect #: PS11723153
Manufacturer #: W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
$27.88
  In Stock
Order within the next 3 hrs and your part ships today!
Hex Nut – Part Number: WP112432
Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts an...
$7.76
  In Stock
Order within the next 3 hrs and your part ships today!
Timer Push Button Knob – Part Number: 313958
Timer Push Button Knob
PartSelect #: PS336560
Manufacturer #: 313958
  No Longer Available
Broil Element – Part Number: 326795
Broil Element
PartSelect #: PS340509
Manufacturer #: 326795
This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features...
$87.06
  In Stock
Order within the next 3 hrs and your part ships today!
Door Handle Spring – Part Number: 310197
Door Handle Spring
PartSelect #: PS336086
Manufacturer #: 310197
  No Longer Available
Hi-limit Thermostat – Part Number: WP303896
Hi-limit Thermostat
PartSelect #: PS11740651
Manufacturer #: WP303896
This thermostat is used for Canadian models only.
$46.25
  On Order
MODULE-SPK – Part Number: 4363560
MODULE-SPK
PartSelect #: PS366262
Manufacturer #: 4363560
  No Longer Available
Timer – Part Number: 285675
Timer
PartSelect #: PS334603
Manufacturer #: 285675
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.   No Longer Available
STIRRER COVER *** – Part Number: 313563
STIRRER COVER ***
PartSelect #: PS336493
Manufacturer #: 313563
  No Longer Available
SWITCH-WL – Part Number: 660741
SWITCH-WL
PartSelect #: PS382151
Manufacturer #: 660741
  No Longer Available
Washer – Part Number: 303963
Washer
PartSelect #: PS601997
Manufacturer #: 303963
  No Longer Available
SWTCH-IGNR – Part Number: 4332653
SWTCH-IGNR
PartSelect #: PS359865
Manufacturer #: 4332653
  No Longer Available

Questions And Answers for 1234*0A

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 1234*0A

[Viewing 7 of 7]
Will Not Start
Fixed by
these parts
Show All
Will not drain
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Will not agitate
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lid closes, switch wouldn't turn on machine.
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Parts Used:
Lid Switch
  • Kenneth from Wilmington, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
30 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would fill up, wash, then stop
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Parts Used:
Lid Switch
  • Glen from Plano, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
22 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door
My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.
Parts Used:
Lid Switch
  • Xiaobin from Cordova, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!