1215 - Parts

This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove...Read more the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more includes all necessary components for installation and is compatible with a wide range of top-loading washers and front-loading dryers. Installation typically involves disconnecting power, accessing the control panel or door area, and replacing the switch using standard tools. The switch is compact and designed to fit seamlessly within the appliance’s housing, with dimensions approximately 2.5 inches in length, 1 inch in width, and 1 inch in height. It features a neutral color finish that blends with most appliance interiors.

This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This bro...Read moreil element is located on the inner upper wall of your oven. Be sure your element wires do not fall through the wall of your oven when you uninstall the existing part. The wires are short and will make your repair more difficult because they are difficult to retrieve.

The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to...Read more move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to install, and requires a wrench set. If the part appears damaged or no longer works, it should be replaced. Refer to your make, model, and diagrams to check if this part is correct.

The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its installation is rated as easy by our customers, and will require only a wrench set. If the part appears damaged or no longer works, it should be replaced.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This dryer blower belt is designed to connect the motor to the blower wheel in compatible Whirlpool dryers, enabling proper air circulation during the drying cycle. Manufactured to OEM specifications, it ensures efficient airflow, consistent heat distribution, and optimal drying performance. A worn or broken belt can lead to symptoms such...Read more as extended drying times, lack of heat, or unusual noise. Constructed from durable, high-quality materials, this replacement part offers a secure fit and long-lasting reliability. Installation should be performed with the appliance disconnected from power, and model compatibility must be verified before replacement.

This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and requires a Screwdriver, Hammer, Washer, and Pipe to fit in the seal. If broken due to damage/fatigue, there will be a leak and the part shou...Read moreld be replaced. Refer to your make, model, and diagrams to ensure this is the right part for you.

This Washer-Lock 5/16 is a silver metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter it is used to prevent the nut from backing off and becoming loose on the pulley shaft and is attached to the drive belt pulley assembly. You will know if you need t...Read morehis because your owners manual will specify it or the model number of your machine will correspond with this part. If the part is broken due to fatigue the shafts will free spin when they should be locked together and must be replaced.

This is a genuine OEM sourced item that is specially produced for Troy-Bilt and MTD roto-tillers. The purpose of this component is to provide a tight seal which will prevent oil from leaking. It is an identical replacement for a missing or worn seal-oil for the tine shaft that was originally installed on a new unit, please make sure to ch...Read moreeck the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.