My Orders
11A-B04E000 (2012) Yard Machines Lawn Mower - Overview
Diagrams for 11A-B04E000
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$26.53
Special Order
Side Chute
Part #731-07486
This genuine manufacturer-sourced part is specially designed for use with Craftsman lawn mowers. It is mounted to the side of the mower to direct grass clippings. The chute provides an identical replacement for a missing or a damaged component that was included with a new unit. Please make sure to check the owners manual of your model for...Read more the correct location and application of this component. Keep in mind this high-quality side chute is made of durable plastic and is sold individually.
Read less
$6.40
In Stock
Bell Blade Support
Part #736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.
Read less
$6.47
In Stock
Screw
Part #710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.
$7.04
In Stock
$25.04
Special Order
Control Cable - B&s
Part #946-0957
This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it is used to connect the handle controls with the mower engine. You may require a wrench when replacing this item. The mower cable is available as an individual replacement part.
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
Part #710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.
$6.47
Special Order
Shoulder Screw
Part #738-04419A
This shoulder screw is sourced directly from original equipment manufacturer. It is an authentic item specially designed for use with a variety of lawn and garden equipment. It is commonly used to secure the upper and lower handles together. Please make sure to check appropriate diagrams for your unit to verify location and application of...Read more this screw. This part is made out of metal and it is sold individually. Please note, the locknut is sold separately. You will need a wrench when installing or removing this shoulder screw.
Read less
$8.76
In Stock
Screw-carriage 5/1
Part #710-04998
This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct repair procedure. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restra...Read moreins the screw and keeps it from turning when the nut is tightened. This screw is made of high-quality metal and is sold individually. A wrench might be needed to replace this hardware.
Read less
$6.40
In Stock
Hinge Pine
Part #747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move.
If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.
Read less
$15.79
Special Order
Front Height Adjuster Plate
Part #787-01818A-0637
This front height adjuster plate is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. The part allows a user to adjust the height of the unit. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality metal and is sold individual...Read morely. Check the diagrams of your model for the exact location and the correct installation of the new part. You will need a wrench to remove and secure the hardware that holds the adjuster plate to the mower.
Read less
$11.36
On Order
Spring-torsion
Part #732-1014C
This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal and it is sold individually. Replacing this item you would need a wrench and pliers.
$29.38
In Stock
Use 748-0376c
Part #748-0376E
This OEM keyed blade adapter connects your lawn mower blade to the spindle, enabling it to rotate and cut the grass. It has a length of 1.19 inches, an inside diameter of 7/8 inches, and a bow tie center pattern. If you notice unusual grinding or rattling sounds coming from your mower, or if you feel excessive vibration in the handle or c...Read moreutting deck, it could indicate a broken blade adapter. Similarly, if the blade is not engaging properly or wobbling, it may be a sign that the adapter is worn out and needs replacement. To replace the adapter, start by tilting your machine backward to access the blade. Use a socket or wrench to unscrew the bolt that secures the blade. Then remove the support, blade, and adapter. When installing the new adapter, make sure to align the key on the adapter with the keyway on the shaft. Before operating your lawn mower, ensure that all of the components within the blade assembly are installed properly and securely in place. Please note that this replacement part does not include any accompanying hardware.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More