11A-546P034 (2002) Ryobi Lawn Mower - Overview

The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.

The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to...Read more move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.

This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it is used to connect the handle controls with the mower engine. You may require a wrench when replacing this item. The mower cable is available as an individual replacement part.

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

This OEM keyed blade adapter connects your lawn mower blade to the spindle, enabling it to rotate and cut the grass. It has a length of 1.19 inches, an inside diameter of 7/8 inches, and a bow tie center pattern. If you notice unusual grinding or rattling sounds coming from your mower, or if you feel excessive vibration in the handle or c...Read moreutting deck, it could indicate a broken blade adapter. Similarly, if the blade is not engaging properly or wobbling, it may be a sign that the adapter is worn out and needs replacement. To replace the adapter, start by tilting your machine backward to access the blade. Use a socket or wrench to unscrew the bolt that secures the blade. Then remove the support, blade, and adapter. When installing the new adapter, make sure to align the key on the adapter with the keyway on the shaft. Before operating your lawn mower, ensure that all of the components within the blade assembly are installed properly and securely in place. Please note that this replacement part does not include any accompanying hardware.

This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is designed to connect and disconnect individual parts together without using any tools. By loosening the knob, you can easily adjust the height of...Read more the handles on your equipment to your liking as well as fold the handles for proper storage. Over time the handle knob can wear down or break. If this happens, you will need to unscrew the knob and remove the old rope guide before you can place the new knob on. Place the new rope guide in position, thread the eye of the cable through the eye hook loop and finally thread the new knob on to the shaft and turn it clockwise with your hands until it is secure.

This throttle housing is a genuine OEM sourced item, it is not an aftermarket imitation. It is specially designed use with lawn mowers and snow blowers. Please note, the cable, trigger, spring and the screws are all sold separately. Please note, this plastic housing is sold individually. To complete this repair you will need a screwdriver.

Used in a variety of models of lawn and garden equipment, this Carriage Bolt is around 1 inch long, made of metal, gold in color, is not part of a kit or assembly, and is sold individually. The purpose of this part is to hold parts in place and is used in a variety of locations. This part can become loose through regular use and should b...Read moree regularly inspected for fatigue and wear. If the threads become stripped, it will need to be replaced. You will need a wrench or socket set and a torque wrench to complete this repair. Refer to your owner's manual to determine how tight it should be. Customers rated this repair as Easy.

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This is an original replacement part manufactured for use with walk-behind lawnmowers. The metal rope guide mounts to the side rail of the handle, and is secured by a handle knob. The rope guide keeps the starter rope on the upper handle for ease of access, and to keep the rope out of the way while operating. The rope guide is sold individually.