1158108 Troy-Bilt Edger - Overview

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locatio...Read morens. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.

This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.

This is a genuine OEM sourced replacement part designed for use with lawn mowers. This wing knob helps to secure upper and lower handles on a mower. It is made out of red plastic and it is sold individually. Please note carriage screw is sold separately.

This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct repair procedure. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restra...Read moreins the screw and keeps it from turning when the nut is tightened. This screw is made of high-quality metal and is sold individually. A wrench might be needed to replace this hardware.

This part is sourced from the original manufacturer and is intended to be used with snowthrowers from MTD, Yard Machines, Troy-Bilt, Yard-Man, and Cub Cadet. The shave plate attaches to the bottom rear of the snowthrower\\\'s auger housing. This item wears down over time because it is used to scrape against the ground to gather snow into the auger as the machine moves forward. The shave plate is sold individually.

This V-belt is designed for various makes and models of snowblowers and is a genuine OEM part made of high-quality rubber. It powers the auger and impeller from the transmission and fits within V-shaped grooves on pulleys. This belt measures 35 inches in length and .5 inches in top width. Belts can stretch and become worn over time and lo...Read morese their tension or break, thus requiring eventual replacement. It is recommended that you inspect the belts within your snowblower regularly to maintain the best performance from them and your snowblower and to avoid having to fix them during a snowstorm. To replace this belt, first, you must disconnect the spark plug. Using a socket wrench, remove the belt cover from your snowblower, if applicable. Once the cover is removed, remove the belt guide, which is used to prevent the belt from slipping off the pulley. Then release the tension on the auger cable by loosening its nut and disconnecting it from the main handle. You can then access and remove the auger V-belt by removing the securing screws holding the snowblower together. Clean the pulleys and attach the new belt, and then while holding the belt, bring the snowblower together and pull the belt around each pulley and secure the snowblower together. Reconnect the auger cable and add tension to it by tightening the nut, connecting the belt guide over the belt, and securing the belt cover and spark plug.

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.