Models > 1130STE

1130STE Snow Blower - Overview

Models starting with 1130STE

Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
  In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
Drive Clutch Cable 39.88
PartSelect #: PS9170572
Manufacturer #: 946-0898
  In Stock
Auger Clutch Cable – Part Number: 946-0897
Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
  In Stock
Nut Lock 5/16-18 – Part Number: 873800500
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...   No Longer Available
Chute – Part Number: 585056901
PartSelect #: PS11824789
Manufacturer #: 585056901
  In Stock
Hex Flange Bearing – Part Number: 941-0245
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
  On Order
Skid Plate, Left Hand – Part Number: 532174762
Skid Plate, Left Hand
PartSelect #: PS9013356
Manufacturer #: 532174762
  In Stock
Worm Gear 20 T, 22" – Part Number: 917-04861
Worm Gear 20 T, 22"
PartSelect #: PS9165943
Manufacturer #: 917-04861
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
  In Stock
Screw, Hex Head 1/4-20x1-5/8 – Part Number: 874780426
Screw, Hex Head 1/4-20x1-5/8
PartSelect #: PS9149001
Manufacturer #: 874780426
  No Longer Available
Bolt-Carriage (5/16-18x5/8) – Part Number: 872110505
Bolt-Carriage (5/16-18x5/8)
PartSelect #: PS9308328
Manufacturer #: 872110505
This OEM Bolt-Carriage (5/16-18x5/8) is used to secure parts in place on a range of equipment, and can be installed using a wrench or socket. Refer to your make model and diagrams to ensure this is th...   No Longer Available
Spring, Deflector – Part Number: 532184505
Spring, Deflector
PartSelect #: PS9019975
Manufacturer #: 532184505
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Parts Used:
Shave Plate 26&#34
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!