EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

112231 Briggs and Stratton Engine - Overview

Models starting with 112231

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Filter- A/C Cartridge – Part Number: 491588S
$8.98
In Stock
Filter- A/C Cartridge
★★★★★
★★★★★
(4)
Part #491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter, locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.
Lawn Mower Spark Plug – Part Number: 796112S
$6.40
In Stock
Lawn Mower Spark Plug
★★★★★
★★★★★
(1)
Part #796112S
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over time a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.
Grommet – Part Number: 692189
$6.40
In Stock
Grommet
★★★★★
★★★★★
(1)
Part #692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cracks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign. This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.
Grommet – Part Number: 692187
$6.40
On Order
Grommet
★★★★★
★★★★★
(2)
Part #692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and is black in color. You must purchase this part individually. Your grommet may require replacing if you notice dark smoke coming out of the exhaust. This is a telltale sign that your grommet has become cracked and damaged. Other symptoms are a reduction in the mower performance, or a backfiring engine. According to our customers, this is an easy repair. It requires no tools. Simply attach the grommet to the breather tube from the crankcase to the carburetor.
Diaphragm-carburetor – Part Number: 270026
No Longer Available
Diaphragm-carburetor
★★★★★
★★★★★
(3)
Part #270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.
Gasket-intake – Part Number: 273113S
$6.40
In Stock
Gasket-intake
Part #273113S
This is the intake gasket designed for various models of small engine equipment, including blower vacuums. The intake gasket plays a crucial role in internal combustion engines, creating an airtight seal between the cylinder head and the intake manifold. This seal prevents the leakage of air, coolant, or fuel. Our intake gasket is an official OEM (Original Equipment Manufacturer) part, crafted from high-quality composite material. If you notice issues such as engine misfiring, overheating, coolant or oil leaks, or overall poor performance, it is essential to inspect and replace your intake gasket promptly. Regular maintenance of your engine and equipment can help prevent damage to other components and reduce the frequency of repairs. To replace this gasket, begin by disconnecting the spark plug and opening the air intake cover to access the air filter. Use a wrench to remove the air filter housing, exposing the internal components. Replace the old intake gasket, reassemble the housing, and put your engine back together. Turn on your equipment and monitor its performance to ensure it runs smoothly.
Gasket-fuel Tank – Part Number: 272409S
$6.40
Special Order
Gasket-fuel Tank
Part #272409S
This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine. This fuel tank gasket is gray in color and made of composite materials. It is sold individually and is not part of a kit or assembly. Over time, the gasket can become damaged due to fatigue or wear, or it can dry out and the seal will fail. If you notice fuel leaking from the fuel tank gasket, it is time to replace it. This is a medium-difficulty repair that requires a wrench, sockets, and a screwdriver. You will look to reinstall your new part between the carburetor and gas tank. Note that if your carburetor and tank are separated for any other repairs or maintenance, you will also need to replace your fuel tank gasket regardless of condition, as it is a one-time use.
Spring-rewind Str – Part Number: 490179
No Longer Available
Spring-rewind Str
Part #490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually. Over time, you may notice that you are having trouble retracting your pull cord, which could be a symptom of the rewind starter spring failing due to fatigue or wear. Replacing this part is a repair our customers found easy. Locate and replace the start spring inside the starter housing; no special tools are required for this job.
Key-flywheel – Part Number: 222698S
$6.40
In Stock
Key-flywheel
★★★★★
★★★★★
(1)
Part #222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.
Tube-pick Up – Part Number: 391813
No Longer Available
Tube-pick Up
Part #391813
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. This part is made out of Plastic and it is Sold Individually.
Gasket-fuel Tank – Part Number: 272996
$6.40
In Stock
Gasket-fuel Tank
Part #272996
This item has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton. The special gasket is used to seal the connection between the carburetor and the fuel tank assembly. This gasket is sold as an individual replacement part.
Clutch-starter – Part Number: 399671
$48.09
In Stock
Clutch-starter
★★★★★
★★★★★
(2)
Part #399671
Discover the power of optimal engine performance with the Briggs and Stratton Starter Clutch. A vital piece of your garden equipments engine, this starter clutch engages your machines flywheel while kick-starting the engine. Crafted with an emphasis on superior quality, this Briggs and Stratton product guarantees robust performance and longevity. Engineered for efficient operation, youll benefit from effortless starts and smoother running machinery. Enhance your outdoor power equipment experience today with Briggs and Strattons reliable Starter Clutch. Trust the experts, upgrade your engine components with Briggs and Stratton.

Exact Part matches for your search term

DISCONTINUED – Part Number: 112231
No Longer Available
DISCONTINUED
This part number matches the current model number 112231
Part #112231
Screw 5/16- 18X3/4 – Part Number: 112231
No Longer Available
Screw 5/16- 18X3/4
This part number matches the current model number 112231
Part #112231
SVC-COVER BOARD W LED;112231,DYF30BFBPL – Part Number: DA81-08717A
$272.14
Special Order
SVC-COVER BOARD W LED;112231,DYF30BFBPL
This part number matches the current model number 112231
Part #DA81-08717A

Common Symptoms of models starting with 112231

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Could not keep an aftermarket muffler on the engine.
15 of 20 people found this instruction helpful.
  • Richard from KERNERSVILLE, NC
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the m uffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Was this helpful?
Thank you for voting!
Muffler rusted out
7 of 18 people found this instruction helpful.
  • Snoopy from TYRONE, GA
  • Very Easy
  • 30 - 60 mins
hand tightened with threads into threaded insert
Was this helpful?
Thank you for voting!