110IL Husqvarna Edger - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the right skid plate is sold separately. It is advised to replace both skid ...Read moreplates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the left skid plate is sold separately. It is advised to replace both skid p...Read morelates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

This replacement scraper bar is an authentic item that is supplied directly from original equipment manufacturer for use with Husqvarna and Poulan snowblowers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear th...Read moree sidewalk, leaving patches of snow behind. Please note this scraper bar is sold individually.

The flange bearing goes between the pulley flange impeller and the impeller assembly. This part is an OEM from Husqvarna, Poulan, and Jonsered for snowblowers. It is made of metal and will need to be replaced if it breaks. This high-quality part is priced individually and may require a socket set during installation.

It is an identical replacement for a missing or damaged impeller pulley which was originally installed on the new unit. Please refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this durable impeller pulley is made of durable metal and is sold individually.

This part is an OEM from the Poulan manufacturer. The bolt is constructed of high-quality metal, and has been designed for use with a variety of lawn and garden machines. Please refer to the specific manual and diagrams for repair instructions. This item is sold individually. A screwdriver and a wrench are often helpful in the removal and replacement.

This is a standard round head bolt which is used in multiple locations on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer. This bolt is designed to stay in place while the lock nut is secured. Please note it is sold individually. Check diagrams for proper location and application of this bolt. Size: 5/16-18 X 3/4.

This is an authentic OEM sourced component which is specially designed for use with Poulan and Husqvarna snowblowers. The impeller is the component that will shovel the snow. It provides an identical replacement for a missing or a faulty impeller assembly was installed on a new unit. Please make sure to refer to the owners manual and the ...Read moreappropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality assembly is made of durable metal and is sold individually.

The carriage bolt attaches to the heavy washer and the front plate. This is a Husqvarna, Bluebird, and Poulan replacement part directly sourced from the manufacturer for use in lawn mowers. This item is available as an individual replacement part and is made of metal. A socket set may be needed during the replacement of this part. Over time this part may break or become stripped and will need to be replaced.