Models > 11084832200

11084832200 Kenmore Dryer - Overview

Sections of the 11084832200

[Viewing 5 of 5]

Manuals & Care Guides for 11084832200

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Catch Kit – Part Number: 279570
Door Catch Kit
★★★★★
★★★★★
(112)
PartSelect #: PS334230
Manufacturer #: 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, ...
$6.32
  In Stock
Order within the next 11 hrs and your part ships today!
Lint Filter – Part Number: W10120998
Lint Filter
★★★★★
★★★★★
(93)
PartSelect #: PS1491676
Manufacturer #: W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
$57.05
  In Stock
Order within the next 11 hrs and your part ships today!
Dryer Heating Element – Part Number: WP3387747
Dryer Heating Element
★★★★★
★★★★★
(126)
PartSelect #: PS11741416
Manufacturer #: WP3387747
When connected to electricity the dryer heating element (Metal frame, Metal element coil, Ceramic coil insulators) glows red hot and generates heat. When air is blown over it, it heats the air which i...
$80.26
  In Stock
Order within the next 11 hrs and your part ships today!
Idler Pulley – Part Number: 279640
Idler Pulley
★★★★★
★★★★★
(106)
PartSelect #: PS334244
Manufacturer #: 279640
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$27.12
  In Stock
Order within the next 11 hrs and your part ships today!
Dryer Drum Support Roller – Part Number: WPW10314173
Dryer Drum Support Roller
★★★★★
★★★★★
(36)
PartSelect #: PS11752609
Manufacturer #: WPW10314173
This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and does not include the tri-rings. This part is sold separately. Most dryers requir...
$22.56
  In Stock
Order within the next 11 hrs and your part ships today!
Dryer Repair Kit – Part Number: 4392067
Dryer Repair Kit
★★★★★
★★★★★
(167)
PartSelect #: PS373088
Manufacturer #: 4392067
This dryer repair kit contains a multi rib dryer belt (part #661570V), 4 drum support rollers, 1 idler assembly, 9 tri rings, and 1 washer. In order to install this kit, you will need a 1/4 inch nut d...
$57.24
  In Stock
Order within the next 11 hrs and your part ships today!
Drive Belt – Part Number: 661570V
Drive Belt
★★★★★
★★★★★
(45)
PartSelect #: PS11722115
Manufacturer #: 661570V
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$29.92
  In Stock
Order within the next 11 hrs and your part ships today!
Thrust Washer – Part Number: WP233520
Thrust Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11740482
Manufacturer #: WP233520
This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below. The washer is found...
$7.76
  In Stock
Order within the next 11 hrs and your part ships today!
Thermostat, Internal-Bias – Part Number: WP8577274
Thermostat, Internal-Bias
★★★★★
★★★★★
(28)
PartSelect #: PS11746740
Manufacturer #: WP8577274
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$48.20
  In Stock
Order within the next 11 hrs and your part ships today!
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.44
  In Stock
Order within the next 11 hrs and your part ships today!
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(12)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$7.48
  In Stock
Order within the next 11 hrs and your part ships today!
Heating Element Connection Wire Kit – Part Number: 279457
Heating Element Connection Wire Kit
★★★★★
★★★★★
(3)
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$11.88
  In Stock
Order within the next 11 hrs and your part ships today!

Questions And Answers for 11084832200

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 11084832200

[Viewing 16 of 16]
Noisy
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Will not agitate
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Burning smell
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Spins slowly
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Parts Used:
Door Catch Kit
  • Terri from Saint Augustine, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
663 of 708 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out heater element
Remove the kick plate from the bottom of the dryer by sliding a putty knife along the top edge to release the plastic clamps, one on each side about 4" in from the edges. The kick plate folds out and down. You will see the heat shield on the right, held in by one hex head screw. Remove screw and heat shield. The element is positioned in an open-front housing and is fastened to the left side of the housing by two hex head screws, located on the "rail" of the element and right near the two wires. Remove the hex-head screws that hold the element in place and disconnected the two wires by pulling them out by hand or with needle nose pliers. The only difficulty here is the cramped working area...I recommend a stubby socket driver for these two screws. Most of this I had to do by feel because I could not see the screw heads. Once the screws are out and the wires have been disconnected, slide the old element straight out toward you. You may need to disconnect a small plastic hose located to the left front of the element, but this hose just pulls right off. Vacume the dust & lint build-up out of the whole area, wipe out the element housing and clean up the whole underside of the dryer prior to installing the new element. Installation is reverse of removal. It also might be a good opportunity to clean out your exhaust duct and the vent to the outside. (Never use the aluminum foil-accordian-type duct.) If the exterior dryer vent has any kind of screen over it, remove it and get rid of it. Screens collect lint, lint builds up and burns out elements.
Parts Used:
Dryer Heating Element
  • Alan from Brooksville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
467 of 525 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle on Kenmore he3 dryer door broke off
1) Removed six smaller Phillips head screws from around the inside of the dryer door. This allowed the black plastic front piece of the dryer door to come off.

2) Unscrewed the two screws holding the damaged door handle and removed the old door handle.

3) Screwed new door handle on to the black plastic front piece of the dryer door

4) Replaced black plastic front piece on the dryer door and screwed the original six screws back in.
Parts Used:
Door Handle - Black
  • Colleen from Lenox, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
258 of 275 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!