EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

11062102311 Kenmore Dryer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Multi Rib Belt - 92-1/4" – Part Number: 341241
$15.00
In Stock
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
(433)
Part #341241
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the rotation of the motor to turn the drum. The belt attaches to the drum, idler pulley, and motor pulley.
Dryer Door Switch – Part Number: WP3406107
$27.36
In Stock
Dryer Door Switch
★★★★★
★★★★★
(508)
Part #WP3406107
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM switch is comprised of plastic and metal, and features the switch and three wires that comprise the part. Sold individually, this part attaches to the inside of the top end of the front panel. One end attaches to the wiring harness, the other goes through the panel to make contact with the door when the door is closed. Over time, this part can be subject to material fatigue or breakage due to frequent use or rough handling. If it breaks or is defective, you won't be able to start or stop your drying cycle, depending on the position your switch broke in. The easiest way to test this part for functionality is to test it by hand. Push on the black tab that sticks out of the front panel to make contact with your dryer door; if there is no resistance in the tab and it doesn't make a click sound, you may need to replace it.
Maintenance Kit – Part Number: 4392065
$35.80
In Stock
Maintenance Kit
★★★★★
★★★★★
(362)
Part #4392065
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If your dryer is damaged, it may be making loud, squeaking, and/or squealing noises while the drum is turning. This is from normal wear and tear. The drum may eventually stop turning all together. This is a sign the part should be replaced. This is one complete maintenance kit. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip. The parts are constructed of plastic, metal, and rubber, and come in black/white/silver.
LINT SCREEN ASSY, WOD – Part Number: W11778253
$57.38
In Stock
LINT SCREEN ASSY, WOD
★★★★★
★★★★★
(211)
Part #W11778253
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
Leveling Foot – Part Number: 49621
$6.40
In Stock
Leveling Foot
★★★★★
★★★★★
(13)
Part #49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.
Drive Motor with Pulley – Part Number: 279827
$97.46
In Stock
Drive Motor with Pulley
★★★★★
★★★★★
(36)
Part #279827
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Timer – Part Number: WPW10185982
$106.19
In Stock
Timer
★★★★★
★★★★★
(46)
Part #WPW10185982
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
CATCH – Part Number: W11429587
$22.52
In Stock
CATCH
★★★★★
★★★★★
(24)
Part #W11429587
This door catch Is an authentic OEM replacement part that is designed to fit with dryers. It is responsible for keeping the dryer door securely closed while it is running. When the door is closed, the catch engages with the door strike and snaps into place, holding the door shut until the drying cycle is completed. Over time the catch may become corroded, worn down, or damaged, or dislodged from frequent use and hard impact. If the catch is faulty, the door may be unable to remain shut. This can lead to heat loss, injury, and potential damage to the dryer itself. If the catch is no longer functional, it is recommended to replace it as soon as possible and avoid using your dryer until the repair is complete.
Push-to-Start Switch – Part Number: WPW10117655
$59.47
In Stock
Push-to-Start Switch
★★★★★
★★★★★
(17)
Part #WPW10117655
This switch or push to start switch is used for dryers. It is the tool that completes the circuit and ultimately starts the dryer by pressing and releasing the button after selecting a setting on the timer. The tools needed for this project are a 1/4 inch nut driver, and a flathead screwdriver. To repair, first remove the rear panel and start switch. Next, replace with new start switch and rear panel. Remember to unplug your dryer before beginning this installation and refer to the manual provided by the manufacturer for further installation instructions.
Door Gasket – Part Number: W10861521
$54.24
In Stock
Door Gasket
★★★★★
★★★★★
(19)
Part #W10861521
This dryer door seal is designed to create a secure, insulated barrier around the door opening, preventing heat from escaping and external air from entering during operation. Made from high-temperature-resistant, durable material, it enhances energy efficiency by maintaining consistent internal temperatures, resulting in faster drying cycles and reduced energy consumption. A properly functioning seal also helps prevent safety hazards associated with air leaks and ensures optimal performance. Replacing a worn or damaged gasket restores the dryer’s ability to retain heat and operate effectively.
Motor Pulley - 60  Hz. – Part Number: WP8066184
$41.07
In Stock
Motor Pulley - 60 Hz.
★★★★★
★★★★★
(8)
Part #WP8066184
The WP8066184 is a dryer motor pulley that is used in some dryer models. It supports the motor belt where it connects with the motor. Symptoms of failure include squealing or grinding noise during drum rotation. Please use the model number of the appliance to check for compatibility before purchasing.

Questions And Answers for 11062102311

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephanie - For model number 11062102311
June 27, 2023
dryer will not get hot
Chris Boyle Profile
Hi Stephanie, thank you for contacting us. Based on our understanding of the issue, we would suggest you replace the thermal cutoff kit, part number PS334299, to fix the issue. We hope this solves your problem!
$47.40
In Stock
Thermal Cut-Off Kit
Was this helpful?
Thank you for voting!
Audra - For model number 11062102311
January 4, 2025
In the inside of my dryer making this screeching noise you can hear all through the house. What should i do?
Chris Boyle Profile
Hi Audra, thank you for the question. Based on our understanding, we would suggest checking the drum rollers, part number PS347627. You may need to replace them to fix the issue. We hope this solves your problem!
$18.22
In Stock
Rear Drum Support Roller Kit
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11062102311

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
door switch was bad
1036 of 1098 people found this instruction helpful.
  • pat from lisbon,, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service
Was this helpful?
Thank you for voting!
Dryer Would Not Turn Off With Door Open
576 of 597 people found this instruction helpful.
  • RICHARD from NORCROSS, GA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open an d when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
Was this helpful?
Thank you for voting!
Dryer wouldn't turn on b/c door switch broken
373 of 456 people found this instruction helpful.
  • April from Xenia, OH
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
It was simple once I figured out what to do:). I removed the 2 screws on the top of the dryer... they were a bit hard to find. Even with the other descriptions on this site. I was removing things I didn't need to. The 2 screws you need to remove are under the LINT COLLECTOR LID. Remove those 2 screws & lift the lid... it will be tigh t at first. the front of the lid has 2 "catches" in the corners.

The hardest part was getting the door switch assembly to "unplug". We pried it off -- eventually -- & then simply plugged in the new one.

Saved me LOTS of money & was worth the 30 minutes - 1 hour of work.

As I said previously, once you realize how to get the lid up & manage to pry off the plug, that's all there is to it -- easy!

Save yourself time & money & do it yourself!
Was this helpful?
Thank you for voting!